[PATCH v3 6/9] ARM: dts: omap: dm816x: Update USB node
Ettore Chimenti
ettore.chimenti at linaro.org
Mon Nov 2 11:52:52 PST 2026
From: Andrew Goodbody <andrew.goodbody at linaro.org>
USB node was not working correctly with DMA enabled as the supporting
code had been updated without updating this SoC's device tree. Bring the
device tree more up to date so that it works with DMA enabled.
Removing deprecated usb_otg_hs `ti,hwmods` property in DT node in favour
of ti-sysc implementation.
Signed-off-by: Andrew Goodbody <andrew.goodbody at linaro.org>
Signed-off-by: Ettore Chimenti <ettore.chimenti at linaro.org>
---
arch/arm/boot/dts/ti/omap/dm816x.dtsi | 40 +++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
index 1e8d225dfb2c..314e5e580c8b 100644
--- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
@@ -573,18 +573,26 @@ uart3: serial at 48024000 {
};
/* NOTE: USB needs a transceiver driver for phys to work */
- usb: usb_otg_hs at 47401000 {
- compatible = "ti,am33xx-usb";
- reg = <0x47401000 0x400000>;
- ranges;
+ usb: target-module at 47400000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x47400000 0x4>,
+ <0x47400010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_SMART>;
+ ti,sysc-delay-us = <2>;
+ clocks = <&default_clkctrl DM816_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
- ti,hwmods = "usb_otg_hs";
+ ranges = <0x0 0x47400000 0x8000>;
- usb0: usb at 47401000 {
+ usb0: usb at 1400 {
compatible = "ti,musb-dm816";
- reg = <0x47401400 0x400
- 0x47401000 0x200>;
+ reg = <0x1400 0x400>,
+ <0x1000 0x200>;
reg-names = "mc", "control";
interrupts = <18>;
interrupt-names = "mc";
@@ -621,10 +629,10 @@ &cppi41dma 11 1 &cppi41dma 12 1
"tx14", "tx15";
};
- usb1: usb at 47401800 {
+ usb1: usb at 1c00 {
compatible = "ti,musb-dm816";
- reg = <0x47401c00 0x400
- 0x47401800 0x200>;
+ reg = <0x1c00 0x400>,
+ <0x1800 0x200>;
reg-names = "mc", "control";
interrupts = <19>;
interrupt-names = "mc";
@@ -661,12 +669,12 @@ &cppi41dma 26 1 &cppi41dma 27 1
"tx14", "tx15";
};
- cppi41dma: dma-controller at 47402000 {
+ cppi41dma: dma-controller at 2000 {
compatible = "ti,am3359-cppi41";
- reg = <0x47400000 0x1000>,
- <0x47402000 0x1000>,
- <0x47403000 0x1000>,
- <0x47404000 0x4000>;
+ reg = <0x0000 0x1000>,
+ <0x2000 0x1000>,
+ <0x3000 0x1000>,
+ <0x4000 0x4000>;
reg-names = "glue", "controller", "scheduler", "queuemgr";
interrupts = <17>;
interrupt-names = "glue";
--
2.56.0
More information about the linux-arm-kernel
mailing list