[PATCH 0/6] iio: adc: versal-sysmon: Add OT alarm, shutdown and thermal zone support

[Amit Kumar Mahapatra]

This patch series:
- Fixes a race between the interrupt teardown and the interrupt handler
- Validates the temperature hysteresis written by userspace and read
  from hardware at probe
- Adds a .shutdown callback so the SysMon alarm interrupts are disabled
  when the system shuts down or kexecs into another kernel
- Adds the over-temperature (OT) alarm as an event-only channel labelled
  "ot", alongside the existing device temperature event
- Updates the Versal SysMon maintainers: removes Salih Erim, who is no
  longer with AMD, and adds myself
- Describes the SysMon in the Versal NET device tree, with a thermal
  zone on its device temperature
- Adds thermal zone support for the SysMon using the existing
  generic-adc-thermal driver

Amit Kumar Mahapatra (6):
  iio: adc: versal-sysmon: fix race in interrupt teardown
  iio: adc: versal-sysmon: validate temperature hysteresis
  iio: adc: versal-sysmon: disable interrupts on shutdown
  iio: adc: versal-sysmon: add over-temperature alarm events
  arm64: versal-net: Add SysMon and thermal zone
  MAINTAINERS: update Versal SysMon maintainers

 MAINTAINERS                                |   2 +-
 arch/arm64/boot/dts/xilinx/versal-net.dtsi |  29 ++++
 drivers/iio/adc/versal-sysmon-core.c       | 158 +++++++++++++++++----
 drivers/iio/adc/versal-sysmon.c            |   6 +
 drivers/iio/adc/versal-sysmon.h            |  15 +-
 5 files changed, 182 insertions(+), 28 deletions(-)


base-commit: a3b3580713f3ac5a32dc2874ee546828977a1d68
-- 
2.34.1