[PATCH 0/2] Add ADLINK LEC-iMX95 board support

[Dinesh kumar v]

This patch series adds device tree support for the ADLINK LEC-iMX95
module on the I-Pi SMARC Plus carrier board.

The series includes:

- Add the ADLINK LEC-iMX95 compatible strings to the Freescale i.MX
  device tree binding.

- Add the common device tree description for the LEC-iMX95 module.

- Add the I-Pi SMARC Plus carrier board device tree.

- Add the new board DTB to the Freescale device tree Makefile.

The module device tree describes the onboard peripherals and interfaces,
while the carrier board device tree describes the carrier-specific
hardware connections.

The device tree has been compiled and validated using DT schema checks.

Hardware: ADLINK LEC-iMX95
Carrier board: I-Pi SMARC Plus
SoC: NXP i.MX95

Signed-off-by: Dinesh kumar v <dinesh.v at adlinktech.com>

Dinesh kumar v (2):
  dt-bindings: arm: fsl: Add ADLINK LEC-iMX95
  arm64: dts: imx95: Add ADLINK LEC-iMX95 board support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx95-lec-ipi-smarc.dts     | 237 ++++++++++
 arch/arm64/boot/dts/freescale/imx95-lec.dtsi  | 414 ++++++++++++++++++
 4 files changed, 658 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-lec-ipi-smarc.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-lec.dtsi

-- 
2.25.1