[PATCH v2 0/9] arm64: dts: rockchip: NanoPi 6 series fixes and improvements

[Heiko Stübner]

Hi Joachim

Am Sonntag, 1. November 2026, 22:55:18 Mitteleuropäische Normalzeit schrieb Joachim Eastwood via B4 Relay:
> This patch series contains a few fixes and miscellaneous improvements
> for the NanoPi 6 series of boards.
> 
> Patch 1 fixes the voltage range on the SDMMC regulator.
> Patch 2 enables HS400 mode on eMMC. Tested on my M6 board.
> Patch 3 adds an IIO HWMON device to monitor the input voltage.
> Patch 4 moves a regulator that only exist R6 boards to the correct dtsi.
> Patch 5-9 renames DT names to match the schematics signals/nets.
> 
> If patch 5-9 is just considered churn I'll drop them. These are more
> nice to have and just makes it easier to cross-reference DT and
> schematics.
> 
> Schematics for the boards can be found here:
> M6: https://wiki.friendlyelec.com/wiki/images/8/85/NanoPi_M6_2405_SCH.PDF
> R6C: https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF
> R6S: https://wiki.friendlyelec.com/wiki/images/2/2f/NanoPi_R6S_2208_SCH.PDF
> 
> Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
> ---
> Changes in v2:
> - Add schematic links to cover letter to ease review
> - Renamed rtl8211f node to gmac
> - Add R-b tags from Shawn Lin
> - Rebased on v7.4-rc1
> - Link to v1: https://patch.msgid.link/20261014-nanopi-m6-improvements-v1-0-e713f71eb4d3@gmail.com

looks like we worked at the same time :-) .

As you will have seen just now, I applied your v1, so please send any
needed changes as follow up patches.


Thanks
Heiko