[PATCH 2/3] arm64: dts: rockchip: rk3588s-nanopi: switch to generic eth phy compatible

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

Use generic Ethernet phy compatible for all NanoPi 6 boards. This allows
us to easily support the new MotorComm YT8531C phy used on NanoPi M6V2.

Note that the Rockchip vendor DTS has used the generic compatible for a
long time.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
index 22b0cdee22b40..4977ccb668f39 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
@@ -269,7 +269,7 @@ &i2s5_8ch {
 
 &mdio1 {
 	rgmii_phy1: ethernet-phy at 1 {
-		compatible = "ethernet-phy-id001c.c916";
+		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rtl8211f_rst>;

-- 
2.56.0