[PATCH v2 2/4] arm64: dts: imx93-var-som-symphony: enable UART7

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r at variscite.com>

Enable UART7 on the Symphony carrier board and add its pinctrl
configuration.

Signed-off-by: Stefano Radaelli <stefano.r at variscite.com>
---
v1->v2:
 - 

 .../boot/dts/freescale/imx93-var-som-symphony.dts  | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
index f541308ebf6b..f313f168cfb4 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -35,6 +35,7 @@ aliases {
 		serial3 = &lpuart4;
 		serial4 = &lpuart5;
 		serial5 = &lpuart6;
+		serial6 = &lpuart7;
 	};
 
 
@@ -310,6 +311,12 @@ &lpuart6 {
 	status = "okay";
 };
 
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
@@ -446,6 +453,13 @@ MX93_PAD_GPIO_IO04__LPUART6_TX			0x31e
 		>;
 	};
 
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO09__LPUART7_RX			0x31e
+			MX93_PAD_GPIO_IO08__LPUART7_TX			0x31e
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX93_PAD_GPIO_IO18__GPIO2_IO18		0x31e
-- 
2.47.3