[PATCH 7/8] arm64: dts: qcom: shikra-cqm-evk-imx577-camera: Add DT overlay

[bod at kernel.org]

On 2026-05-26 22:42 +0530, Nihal Kumar Gupta wrote:
> Shikra CQM and CQS are retail variants sharing the same PM4125 PMIC
> and identical camera supply rails. The only difference between them
> is the integrated modem on CQM, which does not affect camera hardware.
> 
> Add a shared overlay for optional IMX577 integration via CSIPHY1,
> used by both CQM and CQS EVK boards.
> 
> Signed-off-by: Nihal Kumar Gupta <nihal.gupta at oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile                  |  6 +++
>  .../dts/qcom/shikra-cqm-evk-imx577-camera.dtso     | 63 ++++++++++++++++++++++
>  2 files changed, 69 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index a9e9d829fb962386b3975f345ec006504607130a..df41830e18edff82893ca24ca84d7e03065d0ef7 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -337,6 +337,12 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdx75-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk.dtb
> +
> +shikra-cqm-evk-imx577-camera-dtbs	:= shikra-cqm-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
> +shikra-cqs-evk-imx577-camera-dtbs	:= shikra-cqs-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
> +
> +dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk-imx577-camera.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk-imx577-camera.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
> diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk-imx577-camera.dtso b/arch/arm64/boot/dts/qcom/shikra-cqm-evk-imx577-camera.dtso
> new file mode 100644
> index 0000000000000000000000000000000000000000..aedcd164810cf687efb425da79ace7ec6453e3a5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk-imx577-camera.dtso
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/clock/qcom,shikra-gcc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +&camss {
> +	vdd-csiphy-1p2-supply = <&pm4125_l5>;
> +	vdd-csiphy-1p8-supply = <&pm4125_l13>;
> +
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 1 {
> +			reg = <1>;
> +
> +			csiphy1_ep: endpoint {
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&imx577_ep1>;
> +			};
> +		};
> +	};
> +};
> +
> +&cci {
> +	status = "okay";
> +};
> +
> +&cci_i2c1 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	camera at 1a {
> +		compatible = "sony,imx577";
> +		reg = <0x1a>;
> +
> +		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
> +		pinctrl-0 = <&mclk1_default>;
> +		pinctrl-names = "default";
> +
> +		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
> +		assigned-clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
> +		assigned-clock-rates = <24000000>;
> +
> +		dovdd-supply = <&pm4125_l15>;
> +
> +		port {
> +			imx577_ep1: endpoint {
> +				link-frequencies = /bits/ 64 <600000000>;
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&csiphy1_ep>;
> +			};
> +		};
> +	};
> +};
> 
> -- 
> 2.34.1
> 
> 

If the overlay is not specific to board then the overlay should have some
kind of base name shikra-evk-imx577-camera.dtb

This seems like a minor nit-pick and, it is :)

---
bod