[PATCH v5 2/3] arm64: dts: ti: Add k3-am62l3-beaglebadge

[Judith Mendez]

Hi Vignesh,

On 5/28/26 5:52 AM, Vignesh Raghavendra wrote:
> 
> 
> On 27/05/26 05:24, Judith Mendez wrote:
>> BeagleBoard.org BeagleBadge is a compact, affordable open source
>> hardware single board computer based on the Texas Instruments AM62L3
>> SoC designed for IoT and embedded applications with low power
>> consumption. Expansion is provided over open standards based headers
>> including QWIIC and GPIO interfaces.
>>
>> https://www.beagleboard.org/boards/beaglebadge
>>
>> Co-developed-by: Andrew Davis <afd at ti.com>
>> Signed-off-by: Andrew Davis <afd at ti.com>
>> Signed-off-by: Judith Mendez <jm at ti.com>
>> ---
>> Changelog since v4:
>> - Canonical URL fixed
>> - Switch gpio -> gpios in voltage regulator nodes
>> - Regulator-always-on removed in sensor_3v3
>> - Add bootph-all on pinmux nodes
>> - Fix gpio-line-names formatting
>> - Nodes: sdhci2, wlan_en regulator, & pinmux removed
>> - USB aliases removed
>> ---
>>   arch/arm64/boot/dts/ti/Makefile               |   1 +
>>   .../boot/dts/ti/k3-am62l3-beaglebadge.dts     | 658 ++++++++++++++++++
>>   2 files changed, 659 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
>>
>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
>> index 5269c9619b65c..4e377ca011cd8 100644
>> --- a/arch/arm64/boot/dts/ti/Makefile
>> +++ b/arch/arm64/boot/dts/ti/Makefile
>> @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb
>>   
>>   # Boards with AM62Lx SoCs
>>   dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb
>> +dtb-$(CONFIG_ARCH_K3) += k3-am62l3-beaglebadge.dtb
> 
> Sort this alphabetically please

Will fix (:

> 
>>   
>>   # Boards with AM62Px SoC
>>   dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
>> new file mode 100644
>> index 0000000000000..8e816d21a586f
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts
>> @@ -0,0 +1,658 @@
>> +// SPDX-License-Identifier: GPL-2.0
> 
> Dual license this like other files

Ok no problem, will fix and send out v6

~ Judith

...