[PATCH RFC v3 2/5] dt-bindings: clk: zte: Add zx297520v3 LSP clock and reset bindings.
Stefan Dösinger
stefandoesinger at gmail.com
Thu May 28 14:52:59 PDT 2026
The clock controller of the Low Speed Peripherals is relatively clean.
One register per device with gates, muxes and resets and for some
devices a divider. There are even bits in the top controller to control
propagation of clock lines down to LSP.
The clocks are sorted by register address and I am convinced that the
list is complete.
Signed-off-by: Stefan Dösinger <stefandoesinger at gmail.com>
---
.../bindings/clock/zte,zx297520v3-lspclk.yaml | 119 +++++++++++++++++++++
include/dt-bindings/clock/zte,zx297520v3-clk.h | 58 ++++++++++
2 files changed, 177 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/zte,zx297520v3-lspclk.yaml b/Documentation/devicetree/bindings/clock/zte,zx297520v3-lspclk.yaml
new file mode 100644
index 000000000000..e4d50d40e834
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zte,zx297520v3-lspclk.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/zte,zx297520v3-lspclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZTE zx297520v3 SoC LSP clock and reset controller
+
+maintainers:
+ - Stefan Dösinger <stefandoesinger at gmail.com>
+
+description: |
+ This clock and reset controller controls low speed peripherals on the board.
+ This is a relatively isolated subsystem containing UART, I2C, I2S and SPI
+ devices. The clock controller is responsible for bringing the devices out of
+ reset and enabling their clocks as needed.
+
+ The controller receives its clock signal from the top controller and need to
+ be declared as clock inputs.
+
+ All available clocks are defined as preprocessor macros in the
+ 'dt-bindings/clock/zte,zx297520v3-clk.h' header.
+
+properties:
+ compatible:
+ const: zte,zx297520v3-lspclk
+
+ clocks:
+ items:
+ - description: Main PLL divided by 5 output from topclk (124.8 MHz)
+ - description: Main PLL divided by 4 output from topclk (156 MHz)
+ - description: Main PLL divided by 6 output from topclk (104 MHz)
+ - description: Main PLL divided by 8 output from topclk (78 MHz)
+ - description: Main PLL divided by 12 output from topclk (52 MHz)
+ - description: Main oscillator output from topclk (26 MHz)
+ - description: Timer oscillator output from topclk (32 KHz)
+ - description: LSP pclk output from topclk (26 MHz)
+ - description: TDM wclk mux output from topclk
+ - description: DPLL divided by 4 output from topclk (122.88 MHz)
+
+ clock-names:
+ items:
+ - const: mpll_d5
+ - const: mpll_d4
+ - const: mpll_d6
+ - const: mpll_d8
+ - const: mpll_d12
+ - const: osc26m
+ - const: osc32k
+ - const: pclk
+ - const: tdm_wclk
+ - const: dpll_d4
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ reg:
+ items:
+ - description: IO memory region of the LSP controller
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/zte,zx297520v3-clk.h>
+
+ osc26m: osc26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
+ topclk: clk at 13b000 {
+ compatible = "zte,zx297520v3-topclk";
+ reg = <0x0013b000 0x400>,
+ <0x01306000 0x400>;
+ reg-names = "top", "matrix";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&osc26m>, <&osc32k>;
+ clock-names = "osc26m", "osc32k";
+ };
+
+ lspclk: lspclk at 1400000 {
+ compatible = "zte,zx297520v3-lspclk";
+ reg = <0x01400000 0x100>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ clocks = <&topclk ZX297520V3_LSP_MPLL_D5_WCLK>,
+ <&topclk ZX297520V3_LSP_MPLL_D4_WCLK>,
+ <&topclk ZX297520V3_LSP_MPLL_D6_WCLK>,
+ <&topclk ZX297520V3_LSP_MPLL_D8_WCLK>,
+ <&topclk ZX297520V3_LSP_MPLL_D12_WCLK>,
+ <&topclk ZX297520V3_LSP_OSC26M_WCLK>,
+ <&topclk ZX297520V3_LSP_OSC32K_WCLK>,
+ <&topclk ZX297520V3_LSP_PCLK>,
+ <&topclk ZX297520V3_LSP_TDM_WCLK>,
+ <&topclk ZX297520V3_LSP_DPLL_D4_WCLK>;
+ clock-names = "mpll_d5", "mpll_d4", "mpll_d6", "mpll_d8", "mpll_d12",
+ "osc26m", "osc32k", "pclk", "tdm_wclk", "dpll_d4";
+ };
diff --git a/include/dt-bindings/clock/zte,zx297520v3-clk.h b/include/dt-bindings/clock/zte,zx297520v3-clk.h
index 4d85251a0ce5..144a3b064d49 100644
--- a/include/dt-bindings/clock/zte,zx297520v3-clk.h
+++ b/include/dt-bindings/clock/zte,zx297520v3-clk.h
@@ -118,4 +118,62 @@
#define ZX297520V3_DMA_RESET 28
#define ZX297520V3_TOPRST_END 29
+#define ZX297520V3_TIMER_L1_WCLK 0
+#define ZX297520V3_TIMER_L1_PCLK 1
+#define ZX297520V3_WDT_L2_WCLK 2
+#define ZX297520V3_WDT_L2_PCLK 3
+#define ZX297520V3_WDT_L3_WCLK 4
+#define ZX297520V3_WDT_L3_PCLK 5
+#define ZX297520V3_I2C1_WCLK 6
+#define ZX297520V3_I2C1_PCLK 7
+#define ZX297520V3_I2S0_WCLK 8
+#define ZX297520V3_I2S0_PCLK 9
+#define ZX297520V3_I2S1_WCLK 10
+#define ZX297520V3_I2S1_PCLK 11
+#define ZX297520V3_QSPI_WCLK 12
+#define ZX297520V3_QSPI_PCLK 13
+#define ZX297520V3_UART1_WCLK 14
+#define ZX297520V3_UART1_PCLK 15
+#define ZX297520V3_I2C2_WCLK 16
+#define ZX297520V3_I2C2_PCLK 17
+#define ZX297520V3_SPI0_WCLK 18
+#define ZX297520V3_SPI0_PCLK 19
+#define ZX297520V3_TIMER_LB_WCLK 20
+#define ZX297520V3_TIMER_LB_PCLK 21
+#define ZX297520V3_TIMER_LC_WCLK 22
+#define ZX297520V3_TIMER_LC_PCLK 23
+#define ZX297520V3_UART2_WCLK 24
+#define ZX297520V3_UART2_PCLK 25
+#define ZX297520V3_WDT_LE_WCLK 26
+#define ZX297520V3_WDT_LE_PCLK 27
+#define ZX297520V3_TIMER_LF_WCLK 28
+#define ZX297520V3_TIMER_LF_PCLK 29
+#define ZX297520V3_SPI1_WCLK 30
+#define ZX297520V3_SPI1_PCLK 31
+#define ZX297520V3_TIMER_L11_WCLK 32
+#define ZX297520V3_TIMER_L11_PCLK 33
+#define ZX297520V3_TDM_WCLK 34
+#define ZX297520V3_TDM_PCLK 35
+#define ZX297520V3_LSPCLK_END 36
+
+#define ZX297520V3_TIMER_L1_RESET 0
+#define ZX297520V3_WDT_L2_RESET 1
+#define ZX297520V3_WDT_L3_RESET 2
+#define ZX297520V3_I2C1_RESET 3
+#define ZX297520V3_I2S0_RESET 4
+#define ZX297520V3_I2S1_RESET 5
+#define ZX297520V3_QSPI_RESET 6
+#define ZX297520V3_UART1_RESET 7
+#define ZX297520V3_I2C2_RESET 8
+#define ZX297520V3_SPI0_RESET 9
+#define ZX297520V3_TIMER_LB_RESET 10
+#define ZX297520V3_TIMER_LC_RESET 11
+#define ZX297520V3_UART2_RESET 12
+#define ZX297520V3_WDT_LE_RESET 13
+#define ZX297520V3_TIMER_LF_RESET 14
+#define ZX297520V3_SPI1_RESET 15
+#define ZX297520V3_TIMER_L11_RESET 16
+#define ZX297520V3_TDM_RESET 17
+#define ZX297520V3_LSPRST_END 18
+
#endif /* __DT_BINDINGS_CLOCK_ZX297520V3_H */
--
2.53.0
More information about the linux-arm-kernel
mailing list