[PATCH] ARM: dts: aspeed: clemente: Remove IOB NIC TMP421 nodes

[Andrew Jeffery]

On Fri, 22 May 2026 18:07:59 +0800, Mike Hsieh wrote:
> Remove the TMP421 sensor entry from the DTS, as it is no longer the
> primary telemetry source.
> 
> Accessing the CX8 NIC via I2C while it is powered off causes voltage
> leakage on the bus, leading to EEPROM corruption on shared I2C devices.
> Removing this node prevents the BMC from initiating traffic to the NIC
> during initialization, protecting the integrity of the shared bus.
> 
> [...]

Thanks, I've applied this to the BMC tree.

-- 
Andrew Jeffery <andrew at codeconstruct.com.au>