[PATCH 4/8] arm64: dts: qcom: shikra: Add CAMSS node

[Nihal Kumar Gupta]

Add node for the Shikra camera subsystem.

Co-developed-by: Vikram Sharma <vikram.sharma at oss.qualcomm.com>
Signed-off-by: Vikram Sharma <vikram.sharma at oss.qualcomm.com>
Signed-off-by: Nihal Kumar Gupta <nihal.gupta at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 99 ++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index a4334d99c1f35ee851ca8266ec37d4a200a07ee5..6c47cf2a7ef26b4bb7d7f642a240b435cf5208d8 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -604,6 +604,105 @@ opp-384000000 {
 			};
 		};
 
+		camss: camss at 5c11000 {
+			compatible = "qcom,shikra-camss";
+
+			reg = <0x0 0x05c11000 0x0 0x1000>,
+			      <0x0 0x05c6e000 0x0 0x1000>,
+			      <0x0 0x05c75000 0x0 0x1000>,
+			      <0x0 0x05c52000 0x0 0x1000>,
+			      <0x0 0x05c53000 0x0 0x1000>,
+			      <0x0 0x05c66000 0x0 0x400>,
+			      <0x0 0x05c68000 0x0 0x400>,
+			      <0x0 0x05c6f000 0x0 0x4000>,
+			      <0x0 0x05c76000 0x0 0x4000>;
+			reg-names = "top",
+				    "csid0",
+				    "csid1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csitpg0",
+				    "csitpg1",
+				    "vfe0",
+				    "vfe1";
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMSS_AXI_CLK>,
+				 <&gcc GCC_CAMSS_NRT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_RT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CSID_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CSID_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_0_CLK>,
+				 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_1_CLK>,
+				 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK>;
+			clock-names = "ahb",
+				      "axi",
+				      "camnoc_nrt_axi",
+				      "camnoc_rt_axi",
+				      "csi0",
+				      "csi1",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "top_ahb",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe1",
+				      "vfe1_cphy_rx";
+
+			interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 72 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 73 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING 0>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csitpg0",
+					  "csitpg1",
+					  "vfe0",
+					  "vfe1";
+
+			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>,
+					<&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG
+					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG
+					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+			interconnect-names = "ahb",
+					     "hf_mnoc",
+					     "sf_mnoc";
+
+			iommus = <&apps_smmu 0x400 0x0>;
+			power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+				};
+
+				port at 1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		qupv3_0: geniqup at 4ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x04ac0000 0x0 0x2000>;

-- 
2.34.1