[PATCH v5 4/4] arm64: tegra: Reorder reg and reg-names to match bindings

[Thierry Reding]

From: Thierry Reding <treding at nvidia.com>

The ECAM region cannot be the first entry in the "reg" property, because
in that case the unit-address wouldn't match the first entry. The order
of the nodes can also not be changed to match the ECAM entry because the
ECAM region is global and outside of any of the control busses.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
Changes in v5:
- rebase onto v7.1-rc1

Changes in v4:
- revert ECAM "reg" entry order

Changes in v2:
- order ECAM "reg" entry before others
---
 arch/arm64/boot/dts/nvidia/tegra264.dtsi | 48 ++++++++++++++++----------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
index 06d8357bdf52..d4f2a4ab03c3 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -3556,11 +3556,11 @@ cmdqv4: cmdqv at b200000 {
 
 		pci at c000000 {
 			compatible = "nvidia,tegra264-pcie";
-			reg = <0xd0 0xb0000000 0x0 0x10000000>,
-			      <0x00 0x0c000000 0x0 0x00004000>,
+			reg = <0x00 0x0c000000 0x0 0x00004000>,
 			      <0x00 0x0c004000 0x0 0x00001000>,
-			      <0x00 0x0c005000 0x0 0x00001000>;
-			reg-names = "ecam", "xal", "xtl", "xtl-pri";
+			      <0x00 0x0c005000 0x0 0x00001000>,
+			      <0xd0 0xb0000000 0x0 0x10000000>;
+			reg-names = "xal", "xtl", "xtl-pri", "ecam";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -3892,12 +3892,12 @@ gpio_uphy: gpio at 8300000 {
 
 		pci at 8400000 {
 			compatible = "nvidia,tegra264-pcie";
-			reg = <0xa8 0xb0000000 0x0 0x10000000>,
-			      <0x00 0x08400000 0x0 0x00004000>,
+			reg = <0x00 0x08400000 0x0 0x00004000>,
 			      <0x00 0x08404000 0x0 0x00001000>,
 			      <0x00 0x08405000 0x0 0x00001000>,
-			      <0x00 0x08410000 0x0 0x00010000>;
-			reg-names = "ecam", "xal", "xtl", "xtl-pri", "xpl";
+			      <0x00 0x08410000 0x0 0x00010000>,
+			      <0xa8 0xb0000000 0x0 0x10000000>;
+			reg-names = "xal", "xtl", "xtl-pri", "xpl", "ecam";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -3924,12 +3924,12 @@ pci at 8400000 {
 
 		pci at 8420000 {
 			compatible = "nvidia,tegra264-pcie";
-			reg = <0xb0 0xb0000000 0x0 0x10000000>,
-			      <0x00 0x08420000 0x0 0x00004000>,
+			reg = <0x00 0x08420000 0x0 0x00004000>,
 			      <0x00 0x08424000 0x0 0x00001000>,
 			      <0x00 0x08425000 0x0 0x00001000>,
-			      <0x00 0x08430000 0x0 0x00010000>;
-			reg-names = "ecam", "xal", "xtl", "xtl-pri", "xpl";
+			      <0x00 0x08430000 0x0 0x00010000>,
+			      <0xb0 0xb0000000 0x0 0x10000000>;
+			reg-names = "xal", "xtl", "xtl-pri", "xpl", "ecam";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -3956,12 +3956,12 @@ pci at 8420000 {
 
 		pci at 8440000 {
 			compatible = "nvidia,tegra264-pcie";
-			reg = <0xb8 0xb0000000 0x0 0x10000000>,
-			      <0x00 0x08440000 0x0 0x00004000>,
+			reg = <0x00 0x08440000 0x0 0x00004000>,
 			      <0x00 0x08444000 0x0 0x00001000>,
 			      <0x00 0x08445000 0x0 0x00001000>,
-			      <0x00 0x08450000 0x0 0x00010000>;
-			reg-names = "ecam", "xal", "xtl", "xtl-pri", "xpl";
+			      <0x00 0x08450000 0x0 0x00010000>,
+			      <0xb8 0xb0000000 0x0 0x10000000>;
+			reg-names = "xal", "xtl", "xtl-pri", "xpl", "ecam";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -3988,12 +3988,12 @@ pci at 8440000 {
 
 		pci at 8460000 {
 			compatible = "nvidia,tegra264-pcie";
-			reg = <0xc0 0xb0000000 0x0 0x10000000>,
-			      <0x00 0x08460000 0x0 0x00004000>,
+			reg = <0x00 0x08460000 0x0 0x00004000>,
 			      <0x00 0x08464000 0x0 0x00001000>,
 			      <0x00 0x08465000 0x0 0x00001000>,
-			      <0x00 0x08470000 0x0 0x00010000>;
-			reg-names = "ecam", "xal", "xtl", "xtl-pri", "xpl";
+			      <0x00 0x08470000 0x0 0x00010000>,
+			      <0xc0 0xb0000000 0x0 0x10000000>;
+			reg-names = "xal", "xtl", "xtl-pri", "xpl", "ecam";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -4020,12 +4020,12 @@ pci at 8460000 {
 
 		pci at 8480000 {
 			compatible = "nvidia,tegra264-pcie";
-			reg = <0xc8 0xb0000000 0x0 0x10000000>,
-			      <0x00 0x08480000 0x0 0x00004000>,
+			reg = <0x00 0x08480000 0x0 0x00004000>,
 			      <0x00 0x08484000 0x0 0x00001000>,
 			      <0x00 0x08485000 0x0 0x00001000>,
-			      <0x00 0x08490000 0x0 0x00010000>;
-			reg-names = "ecam", "xal", "xtl", "xtl-pri", "xpl";
+			      <0x00 0x08490000 0x0 0x00010000>,
+			      <0xc8 0xb0000000 0x0 0x10000000>;
+			reg-names = "xal", "xtl", "xtl-pri", "xpl", "ecam";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";

-- 
2.52.0