[PATCH 00/10] Add support for A9 family clock controller

[Jerome Brunet]

On lun. 11 mai 2026 at 20:47, Jian Hu via B4 Relay <devnull+jian.hu.amlogic.com at kernel.org> wrote:

> There are 4 clock controllers in A9 SoC:
> - SCMI clock controller: these clocks are managed by the
>   Trusted Firmware-A(TF-A) and handled through SCMI.
> - PLL clock controller.
> - peripheral clock controller.
> - AO clock controller.
>
> There are reserved register regions placed between individual PLLs, so a
> separate driver is implemented for each PLL, similar to T7.
>
> Compared to previous SoCs PLLs, the A9 PLL controller introduces 4 new features:
> 1.PLL l_detect signal supports active-high configuration.
>   Previous A7 and T7 l_detect signals are active-low.
> 2.PLL reset signal supports active-low configuration.
>   Previous reset signals are active-high.
> 3.Support POWER_OF_TWO for the PLL pre-divider N;
>   the N pre-divider follows the same calculation rule as OD.
> 4.The PLL input path includes an inherent divide-by-2 divider.
>
> Implement the first three features in clk-pll.c (verified on A9 and T7),
> with no impact to PLL logic on existing SoCs. Add a fixed divide-by-2 to
> A9 PLL driver for the fourth feature.
>  
> A9 PLL is composed as follows:
>  
>                        PLL
>           +---------------------------------+
>           |                                 |
>           |             +--+                |
>    in/2 >>---[ /2^N ]-->|  |      +-----+   |
>           |             |  |------| DCO |----->> out
>           |  +--------->|  |      +--v--+   |
>           |  |          +--+         |      |
>           |  |                       |      |
>           |  +--[ *(M + (F/Fmax) ]<--+      |
>           |                                 |
>           +---------------------------------+
>  
>   out = in / 2  * (m + frac / frac_max) / 2^n
>
> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
> ---
> Jian Hu (10):
>       dt-bindings: clock: Add Amlogic A9 SCMI clock controller
>       dt-bindings: clock: Add Amlogic A9 PLL clock controller
>       dt-bindings: clock: Add Amlogic A9 peripherals clock controller
>       dt-bindings: clock: Add Amlogic A9 AO clock controller
>       clk: amlogic: PLL l_detect signal supports active-high configuration
>       clk: amlogic: PLL reset signal supports active-low configuration
>       clk: amlogic: Support POWER_OF_TWO for PLL pre-divider
>       clk: amlogic: Add A9 PLL clock controller driver
>       clk: amlogic: Add A9 peripherals clock controller driver
>       clk: amlogic: Add A9 AO clock controller driver
>
>  .../bindings/clock/amlogic,a9-aoclkc.yaml          |   76 +
>  .../clock/amlogic,a9-peripherals-clkc.yaml         |  150 ++
>  .../bindings/clock/amlogic,a9-pll-clkc.yaml        |  110 +
>  drivers/clk/meson/Kconfig                          |   28 +
>  drivers/clk/meson/Makefile                         |    2 +
>  drivers/clk/meson/a9-aoclk.c                       |  494 +++++
>  drivers/clk/meson/a9-peripherals.c                 | 2317 ++++++++++++++++++++
>  drivers/clk/meson/a9-pll.c                         |  831 +++++++
>  drivers/clk/meson/clk-pll.c                        |   79 +-
>  drivers/clk/meson/clk-pll.h                        |    6 +
>  include/dt-bindings/clock/amlogic,a9-aoclkc.h      |   76 +
>  .../clock/amlogic,a9-peripherals-clkc.h            |  352 +++
>  include/dt-bindings/clock/amlogic,a9-pll-clkc.h    |   55 +
>  include/dt-bindings/clock/amlogic,a9-scmi-clkc.h   |   51 +
>  14 files changed, 4609 insertions(+), 18 deletions(-)

For the next version, please split things up.
There is no hard dependency between the different controllers. This will
ease the review.

The PLL controllers are bringing a new contraints in. The global/static
nature of the controllers is something that has been bothering me for a
while but there was no real reason to address it so far. Please give me
some time to think about. Feel free to re-post the other controllers in the
meantime. 

> ---
> base-commit: ca89c88bcf69daca829044c638a8163d5ce47af0
> change-id: 20260511-b4-a9_clk-67652c1ae56e
>
> Best regards,

-- 
Jerome