[PATCH] pinctrl: sunxi: Implement function_is_gpio

[Andre Przywara]

On Sun, 17 May 2026 19:14:05 +0200
Paul Kocialkowski <paulk at sys-base.io> wrote:

Hi Paul,

> The function_is_gpio pinmux op allows the core to find out whether a
> GPIO can be safely requested from a pinctrl property and requested as a
> GPIO at the same time.
> 
> This is especially useful to request a GPIO with a particular drive
> strength, which would otherwise not be possible.

That looks a easy enough solution, but:

> Signed-off-by: Paul Kocialkowski <paulk at sys-base.io>
> ---
>  drivers/pinctrl/sunxi/pinctrl-sunxi.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index d3042e0c9712..6162f2d86723 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -821,6 +821,17 @@ static int sunxi_pmx_get_func_groups(struct pinctrl_dev *pctldev,
>  	return 0;
>  }
>  
> +static bool sunxi_pmx_function_is_gpio(struct pinctrl_dev *pctldev,
> +				       unsigned function)
> +{
> +	struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
> +
> +	if (!strncmp(pctl->functions[function].name, "gpio", 4))

I wonder if this condition is a bit too relaxed? There could be
some (theoretical) function just starting with gpio, but not being mux
0 or 1. So should we check for gpio_in or gpio_out, explicitly? Or at
least use (strcmp(name, "gpio_", 5)? Or maybe even better for the mux
value directly? Is "function" an indicator of this, or does this rely
on the two GPIO functions being always listed first, at least so far?

And what about the IRQ function? Isn't that some GPIO as well, or does
that not count for the purpose of the function_is_gpio() callback?

Cheers,
Andre

> +		return true;
> +
> +	return false;
> +}
> +
>  static void sunxi_pmx_set(struct pinctrl_dev *pctldev,
>  				 unsigned pin,
>  				 u8 config)
> @@ -952,6 +963,7 @@ static const struct pinmux_ops sunxi_pmx_ops = {
>  	.get_functions_count	= sunxi_pmx_get_funcs_cnt,
>  	.get_function_name	= sunxi_pmx_get_func_name,
>  	.get_function_groups	= sunxi_pmx_get_func_groups,
> +	.function_is_gpio	= sunxi_pmx_function_is_gpio,
>  	.set_mux		= sunxi_pmx_set_mux,
>  	.gpio_set_direction	= sunxi_pmx_gpio_set_direction,
>  	.request		= sunxi_pmx_request,