[PATCH 14/16] media: sun6i-isp: Use V4L2 subdev active state

[arash golgol]

Hi Paul,

On Fri, May 22, 2026 at 2:45 PM Paul Kocialkowski <paulk at sys-base.io> wrote:
>
> Hi Arash,
>
> Le Thu 21 May 26, 12:53, arash golgol a écrit :
> > I used LicheePi Zero Dock (V3s) with the following pipeline as test setup.
> >
> > ov5647 -> sun6i-mipi-csi2 -> sun6i-csi-bridge -> sun6i-isp-proc ->
> > sun6i-isp-capture
> >
> > I verified TRY and ACTIVE state handling, including changing TRY
> > formats without affecting ACTIVE state. Format propagation from the
> > sink (csi) pad to the source pad was also tested.
> >
> > I also tested streaming with the sensor test pattern enabled and
> > verified the captured output was correct.
> >
> > Tested-by: Arash Golgol <arash.golgol at gmail.com>
>
> Thanks a lot for testing this! Did you test just this patch or the other
> ones (especially sun6i-csi format enumeration) as well?
>

Happy to help.
I only tested patch 14 for now, but I plan to test the other patches
as well when I get some more time, especially the sun6i-csi changes.

> Also if you have an opinion on the code itself feel free to drop a
> Reviewed-by tag, a lot of this work is very similar to what you did for
> sun6i-csi and other drivers.
>

>From a code perspective, the changes look good to me.
Reviewed-by: Arash Golgol <arash.golgol at gmail.com>

-- 
Regards,
Arash Golgol