[PATCH v2 7/7] arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist

[Marek Vasut]

On 5/22/26 5:47 PM, Geert Uytterhoeven wrote:

Hello Geert,

>> +++ b/arch/arm64/boot/dts/renesas/r8a779md-geist.dts
> 
>> +&avb {
>> +       pinctrl-0 = <&avb_pins>;
>> +       pinctrl-names = "default";
>> +       phy-handle = <&phy0>;
>> +       tx-internal-delay-ps = <2000>;
>> +       status = "okay";
>> +
>> +       phy0: ethernet-phy at 0 {
>> +               compatible = "ethernet-phy-id0022.1622";
>> +               rxc-skew-ps = <1500>;
>> +               reg = <0>;
>> +               interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
>> +               reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
>> +               reset-assert-us = <100>;
> 
> 10000?
> 
>> +               reset-deassert-us = <100>;
> 
> 300?
> 
>> +       };
>> +};
> 
>> +&pfc {
> 
>> +       pwm2_pins: pwm2 {
>> +               groups = "pwm2_a";
>> +               function = "pwm2";
>> +       };
> 
> Shall I drop this while applying?
> 
>> +&pwm2 {
>> +       pinctrl-0 = <&pwm2_pins>;
>> +       pinctrl-names = "default";
>> +
>> +       status = "okay";
>> +};
> 
> Shall I drop this while applying?
> 
> With the above fixed:
> Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
I sent a V3 only of the 7/7 In-Reply-To this message, I hope it helps.

Thank you for the reviews !