[PATCH v2 05/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" DSI

Vitor Soares ivitro at gmail.com
Fri May 22 06:20:18 PDT 2026 

From: Vitor Soares <vitor.soares at toradex.com>

Add a device tree overlay for the Toradex Capacitive Touch Display 10.1"
on the Verdin DSI_1 interface. The display features an internal
Texas Instruments SN65DSI83 DSI-to-LVDS bridge driving a Riverdi
RVT101HVLNWC00 10.1" WXGA (1280x800) IPS TFT LCD panel. The touch input
is provided by an Ilitek ILI2132 capacitive touch controller.

The overlay is also combined with the Verdin AM62 Dahlia carrier board
device trees to provide ready-to-use DTBs in both WiFi and non-Wifi SoM
variants.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-dsi
Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-display-adapter/
Assisted-by: Claude:claude-sonnet-4.6
Signed-off-by: Vitor Soares <vitor.soares at toradex.com>
---
 arch/arm64/boot/dts/ti/Makefile               |   9 ++
 ...625-verdin-panel-cap-touch-10inch-dsi.dtso | 132 ++++++++++++++++++
 2 files changed, 141 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 867c05b675d1..dc397bc693ac 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -11,10 +11,16 @@
 # Boards with AM62x SoC
 k3-am625-verdin-nonwifi-dahlia-dsi-to-hdmi-dtbs := k3-am625-verdin-nonwifi-dahlia.dtb \
 	k3-am625-verdin-dsi-to-hdmi.dtbo
+k3-am625-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi-dtbs := \
+	k3-am625-verdin-nonwifi-dahlia.dtb \
+	k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo
 k3-am625-verdin-nonwifi-dev-dsi-to-hdmi-dtbs := k3-am625-verdin-nonwifi-dev.dtb \
 	k3-am625-verdin-dsi-to-hdmi.dtbo
 k3-am625-verdin-wifi-dahlia-dsi-to-hdmi-dtbs := k3-am625-verdin-wifi-dahlia.dtb \
 	k3-am625-verdin-dsi-to-hdmi.dtbo
+k3-am625-verdin-wifi-dahlia-panel-cap-touch-10inch-dsi-dtbs := \
+	k3-am625-verdin-wifi-dahlia.dtb \
+	k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo
 k3-am625-verdin-wifi-dev-dsi-to-hdmi-dtbs := k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-dsi-to-hdmi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
@@ -26,6 +32,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-tqma62xx-mba62xx.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-hdmi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-dsi-to-hdmi.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev-dsi-to-hdmi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
@@ -33,8 +40,10 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-ivy.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-zinnia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-dsi.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-panel-cap-touch-10inch-lvds.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia-dsi-to-hdmi.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia-panel-cap-touch-10inch-dsi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev-dsi-to-hdmi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso
new file mode 100644
index 000000000000..de0148ddd596
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-panel-cap-touch-10inch-dsi.dtso
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex Capacitive Touch Display 10.1" on Verdin DSI_1.
+ * On Dahlia (X17) and Development Board (X48), DSI_1 is exposed via a
+ * Samtec LSS-130 connector and requires the Toradex DSI Display Adapter
+ * to convert to FFC/FPC connector.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-dsi
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-dsi
+ * https://developer.toradex.com/hardware/accessories/add-ons/dsi-display-adapter
+ * https://www.toradex.com/accessories/verdin-dsi-display-adapter
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+&{/} {
+	backlight_pwm3: backlight-pwm3 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		power-supply = <&reg_3v3>;
+		/* Verdin PWM_3_DSI (SODIMM 19) - PWM_3_DSI_LVDS */
+		pwms = <&epwm1 0 6666667 0>;
+	};
+
+	panel-lvds-bridge {
+		compatible = "riverdi,rvt101hvlnwc00", "panel-lvds";
+		backlight = <&backlight_pwm3>;
+		data-mapping = "vesa-24";
+		height-mm = <136>;
+		width-mm = <217>;
+
+		panel-timing {
+			clock-frequency = <72400000>;
+			de-active = <1>;
+			hactive = <1280>;
+			hback-porch = <88 88 88>;
+			hfront-porch = <12 72 132>;
+			hsync-active = <0>;
+			hsync-len = <1 5 40>;
+			pixelclk-active = <1>;
+			vactive = <800>;
+			vback-porch = <23 23 23>;
+			vfront-porch = <1 15 49>;
+			vsync-active = <0>;
+			vsync-len = <1 10 20>;
+		};
+
+		port {
+			panel_lvds_bridge_in: endpoint {
+				remote-endpoint = <&dsi_lvds_bridge_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port at 1 {
+		reg = <1>;
+
+		dsi_bridge_out: endpoint {
+			remote-endpoint = <&dsi_lvds_bridge_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bridge at 2c {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi1_bkl_en>;
+		/* Verdin GPIO_10_DSI (SODIMM 21) - DSI_1_BKL_EN */
+		enable-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+
+				dsi_lvds_bridge_in: endpoint {
+					remote-endpoint = <&dsi_bridge_out>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+
+			port at 2 {
+				reg = <2>;
+
+				dsi_lvds_bridge_out: endpoint {
+					remote-endpoint = <&panel_lvds_bridge_in>;
+				};
+			};
+		};
+	};
+
+	touch at 41 {
+		compatible = "ilitek,ili2132";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi1_int>, <&pinctrl_i2s_2_bclk_gpio>;
+		/* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <49 IRQ_TYPE_EDGE_RISING>;
+		/* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */
+		reset-gpios = <&main_gpio0 35 GPIO_ACTIVE_LOW>;
+	};
+};
-- 
2.54.0

More information about the linux-arm-kernel mailing list