[PATCH V3 0/8] PCI: imx6: Integrate pwrctrl API and update device trees

[Sherry Sun]

> > -----Original Message-----
> > From: Sherry Sun (OSS) <sherry.sun at oss.nxp.com>
> > Sent: Wednesday, May 20, 2026 4:49 PM
> > To: robh at kernel.org; krzk+dt at kernel.org; conor+dt at kernel.org; Frank Li
> > <frank.li at nxp.com>; s.hauer at pengutronix.de; kernel at pengutronix.de;
> > festevam at gmail.com; lpieralisi at kernel.org; kwilczynski at kernel.org;
> > mani at kernel.org; bhelgaas at google.com; Hongxing Zhu
> > <hongxing.zhu at nxp.com>; l.stach at pengutronix.de
> > Cc: imx at lists.linux.dev; linux-pci at vger.kernel.org; linux-arm-
> > kernel at lists.infradead.org; devicetree at vger.kernel.org; linux-
> > kernel at vger.kernel.org; Sherry Sun <sherry.sun at nxp.com>
> > Subject: [PATCH V3 0/8] PCI: imx6: Integrate pwrctrl API and update
> > device trees
> >
> > From: Sherry Sun <sherry.sun at nxp.com>
> >
> > This series integrates the PCI pwrctrl framework into the pci-imx6
> > driver and updates i.MX EVK board device trees to support it.
> >
> > Patches 2-8 update device trees for i.MX EVK boards which maintained
> > by NXP to move power supply properties from the PCIe controller node
> > to the Root Port child node, which is required for pwrctrl framework.
> > Affected boards:
> > - i.MX6Q/DL SABRESD
> > - i.MX6SX SDB
> > - i.MX8MM EVK
> > - i.MX8MP EVK
> > - i.MX8MQ EVK
> > - i.MX8DXL/QM/QXP EVK
> > - i.MX95 15x15/19x19 EVK
> >
> > The driver maintains legacy regulator handling for device trees that
> > haven't been updated yet. Both old and new device tree structures are
> supported.
> >
> > Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
> Hi Sherry:
> Since the vpcie3v3aux is used to power up the WAKE#, it is always on in this
> pwrctrl framework whatever the system is in suspend or not, right?
> 

Hi Richard,
Currently the new pwrctrl framework doesn't support vpcie3v3aux, it handles all
regulators with of_regulator_bulk_get_all() and regulator_bulk_enable/disable().
The vpcie3v3aux now only works with pci-imx6 driver.

Best Regards
Sherry

> Best Regards
> Richard Zhu
> > ---
> > Changes in V3:
> > 1. Rebased on top of latest 7.1.0-rc4
> >
> > Changes in V2:
> > 1. After commit 2d8c5098b847 ("PCI/pwrctrl: Do not power off on pwrctrl
> >    device removal"), the pwrctrl drivers no longer power off devices
> >    during removal. Update pci-imx6 driver's shutdown callback in patch#1
> >    to explicitly call pci_pwrctrl_power_off_devices() before
> >    pci_pwrctrl_destroy_devices() to ensure devices are properly powered
> >    off.
> > ---
> >
> > Sherry Sun (8):
> >   PCI: imx6: Integrate new pwrctrl API for pci-imx6
> >   arm: dts: imx6qdl-sabresd: Move power supply property to Root Port
> >     node
> >   arm: dts: imx6sx-sdb: Move power supply property to Root Port node
> >   arm64: dts: imx8mm-evk: Move power supply property to Root Port node
> >   arm64: dts: imx8mp-evk: Move power supply properties to Root Port node
> >   arm64: dts: imx8mq-evk: Move power supply properties to Root Port node
> >   arm64: dts: imx8dxl/qm/qxp: Move power supply properties to Root Port
> >     node
> >   arm64: dts: imx95: Move power supply properties to Root Port node
> >
> >  .../arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi |  2 +-
> >  arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi     |  2 +-
> >  arch/arm64/boot/dts/freescale/imx8dxl-evk.dts |  4 ++--
> > arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi |  2 +-
> > arch/arm64/boot/dts/freescale/imx8mp-evk.dts  |  4 ++--
> > arch/arm64/boot/dts/freescale/imx8mq-evk.dts  |  4 ++--
> > arch/arm64/boot/dts/freescale/imx8qm-mek.dts  |  4 ++--
> > arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  4 ++--
> >  .../boot/dts/freescale/imx95-15x15-evk.dts    |  4 ++--
> >  .../boot/dts/freescale/imx95-19x19-evk.dts    |  8 +++----
> >  drivers/pci/controller/dwc/Kconfig            |  1 +
> >  drivers/pci/controller/dwc/pci-imx6.c         | 24 ++++++++++++++++++-
> >  12 files changed, 43 insertions(+), 20 deletions(-)
> >
> > --
> > 2.37.1