[PATCH 02/15] arm64: dts: st: add SDMMC2 support on stm32mp25

[Dario Binacchi]

The SDMMC2 controller supports SD cards, eMMC memories and SDIO devices.

Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---

 arch/arm64/boot/dts/st/stm32mp251.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 673fbc5632e6..5e46024d2215 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -1667,6 +1667,21 @@ sdmmc1: mmc at 48220000 {
 				status = "disabled";
 			};
 
+			sdmmc2: mmc at 48230000 {
+				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00353180>;
+				reg = <0x48230000 0x400>, <0x44230800 0x8>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SDMMC2>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC2_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				access-controllers = <&rifsc 77>;
+				status = "disabled";
+			};
+
 			ethernet1: ethernet at 482c0000 {
 				compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20";
 				reg = <0x482c0000 0x4000>;
-- 
2.43.0