[PATCH net v2 1/5] dt-bindings: ethernet: eswin: add optional TXD and RXD delay register offsets
lizhi2 at eswincomputing.com
lizhi2 at eswincomputing.com
Sun May 17 19:20:23 PDT 2026
From: Zhi Li <lizhi2 at eswincomputing.com>
Document two optional cells in eswin,hsp-sp-csr for the TXD and RXD
delay control register offsets.
These registers are used by the driver to clear any residual delay
configuration left by the bootloader, ensuring that MAC-side RGMII delay
settings are applied solely according to the kernel configuration.
Add a reference to the EIC7700X SoC Technical Reference Manual for
background information about the HSP CSR block.
Fixes: 888bd0eca93c ("dt-bindings: ethernet: eswin: Document for EIC7700 SoC")
Signed-off-by: Zhi Li <lizhi2 at eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley at microchip.com>
---
.../devicetree/bindings/net/eswin,eic7700-eth.yaml | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
index 91e8cd1db67b..b66ae6300faf 100644
--- a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
+++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
@@ -73,6 +73,15 @@ properties:
HSP CSR is to control and get status of different high-speed peripherals
(such as Ethernet, USB, SATA, etc.) via register, which can tune
board-level's parameters of PHY, etc.
+
+ Additional background information about the High-Speed Subsystem
+ and the HSP CSR block is available in Chapter 10 ("High-Speed Interface")
+ of the EIC7700X SoC Technical Reference Manual, Part 4
+ (EIC7700X_SoC_Technical_Reference_Manual_Part4.pdf). The manual is
+ publicly available at
+ https://github.com/eswincomputing/EIC7700X-SoC-Technical-Reference-Manual/releases
+
+ This reference is provided for background information only.
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
@@ -82,6 +91,8 @@ properties:
- description: Offset of AXI clock controller Low-Power request
register
- description: Offset of register controlling TX/RX clock delay
+ - description: Optional offset of register controlling TXD delay
+ - description: Optional offset of register controlling RXD delay
required:
- compatible
@@ -116,7 +127,7 @@ examples:
reset-names = "stmmaceth";
rx-internal-delay-ps = <200>;
tx-internal-delay-ps = <200>;
- eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>;
+ eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118 0x114 0x11c>;
snps,axi-config = <&stmmac_axi_setup>;
snps,aal;
snps,fixed-burst;
--
2.25.1
More information about the linux-arm-kernel
mailing list