[PATCH v3 3/5] arm64: dts: allwinner: a100: Add LRADC node

[Alexander Sverdlin]

A100/A133 SoCs feature a Low Rate ADC (LRADC) for Key application.

Specs:
- Power supply voltage: 1.8 V
- Reference voltage: 1.35 V
- Interrupt support
- Support Hold Key and General Key
- Support normal, continue and single work mode
- 6-bits resolution, sample rate up to 2 kHz
- Voltage input range between 0 and 1.35 V

Signed-off-by: Alexander Sverdlin <alexander.sverdlin at gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index b3fb1e0ee796..2bba13c5d25c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -466,6 +466,15 @@ ths: thermal-sensor at 5070400 {
 			#thermal-sensor-cells = <1>;
 		};
 
+		lradc: lradc at 5070800 {
+			compatible = "allwinner,sun50i-r329-lradc";
+			reg = <0x05070800 0x400>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LRADC>;
+			resets = <&ccu RST_BUS_LRADC>;
+			status = "disabled";
+		};
+
 		usb_otg: usb at 5100000 {
 			compatible = "allwinner,sun50i-a100-musb",
 				     "allwinner,sun8i-a33-musb";
-- 
2.54.0