[PATCH v3 1/3] soc: bcm2835: raspberrypi-firmware: Add voltage domain IDs

[Shubham Chakraborty]

Add Raspberry Pi firmware voltage domain identifiers for the mailbox
property interface.

Also add the voltage request structure used with
RPI_FIRMWARE_GET_VOLTAGE so firmware clients can share the common API
definition from the firmware header.

Signed-off-by: Shubham Chakraborty <chakrabortyshubham66 at gmail.com>
---
 include/soc/bcm2835/raspberrypi-firmware.h | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index e1f87fbfe554..975bef529854 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -156,6 +156,31 @@ enum rpi_firmware_clk_id {
 	RPI_FIRMWARE_NUM_CLK_ID,
 };
 
+enum rpi_firmware_volt_id {
+	RPI_FIRMWARE_VOLT_ID_CORE = 1,
+	RPI_FIRMWARE_VOLT_ID_SDRAM_C = 2,
+	RPI_FIRMWARE_VOLT_ID_SDRAM_P = 3,
+	RPI_FIRMWARE_VOLT_ID_SDRAM_I = 4,
+	RPI_FIRMWARE_NUM_VOLT_ID,
+};
+
+/**
+ * struct rpi_firmware_get_voltage_request - Firmware request for a voltage
+ * @id:		ID of the voltage being queried
+ * @value:	Voltage in microvolts. Set by the firmware.
+ *
+ * Used by @RPI_FIRMWARE_GET_VOLTAGE.
+ */
+struct rpi_firmware_get_voltage_request {
+	__le32 id;
+	__le32 value;
+} __packed;
+
+#define RPI_FIRMWARE_GET_VOLTAGE_REQUEST(_id)	\
+	{					\
+		.id = cpu_to_le32(_id),		\
+	}
+
 /**
  * struct rpi_firmware_clk_rate_request - Firmware Request for a rate
  * @id:	ID of the clock being queried
-- 
2.54.0