[PATCH 00/12] crypto: atmel - refactor common i2c support and add SHA256 ahash support

[Thorsten Blum]

Hi Lothar,

On Tue, May 12, 2026 at 10:43:37PM +0000, Lothar Rubusch wrote:
> This series restructures the Atmel secure element drivers around a
> shared atmel-i2c core and adds SHA256 ahash support for ATSHA204A and
> ECC based devices.
> 
> The existing drivers duplicated substantial parts of the transport,
> RNG, EEPROM and device management logic. This series consolidates the
> common functionality into the shared i2c core and converts the client
> drivers to capability based allocation.
> 
> The series also introduces per-device timing configuration through
> match data, moves sanity checks and RNG handling into the core driver,
> updates workqueue handling and cleans up internal constants and helper
> definitions.
> 
> The final patch adds SHA256 ahash support using the hardware SHA engine
> provided by the devices.
> 
> ATSHA204A devices require software-side SHA256 padding according to
> FIPS 180-4, while newer ECC devices provide a dedicated SHA final
> command and perform padding internally in hardware.
> 
> Supporting the SHA engine also requires changes to the command
> transport path. SHA operations must execute as a strict uninterrupted
> sequence consisting of SHA INIT, one or more SHA COMPUTE commands and,
> for ECC devices, a terminating SHA FINAL command. The device loses its
> internal SHA state if it enters sleep mode or if unrelated commands
> are interleaved during the transaction.
> 
> To satisfy these hardware requirements, the send/receive path is split
> into a low-level transfer helper and a higher-level wrapper managing
> wakeup, sleep and locking. SHA operations keep the device awake and
> hold the i2c lock for the full duration of the hashing transaction.
> 
> The series has been tested on ATSHA204A and ATECC508A devices.
> Tests are ongoing/pending on ATECC608A and ATECC608B.
> ---
> Lothar Rubusch (12):
>   crypto: atmel - introduce shared I2C client management
>   crypto: atmel - move capability-based client allocation into i2c core
>   crypto: atmel - remove obsolete CONFIG_OF guard
>   crypto: atmel - add per-device timing and match-data driven
>     configuration
>   crypto: atmel - move RNG support into common i2c core
>   crypto: atmel - move EEPROM access support into common i2c core
>   crypto: atmel - expose CONFIG zone through sysfs
>   crypto: atmel - move device sanity check to core driver
>   crypto: atmel - check client data in remove callbacks
>   crypto: atmel - update workqueue flags and add flush on exit
>   crypto: atmel - refactor and localize driver constants
>   crypto: atmel - add SHA256 ahash support
> 
>  drivers/crypto/atmel-ecc.c     | 252 +++++++-----
>  drivers/crypto/atmel-i2c.c     | 679 +++++++++++++++++++++++++++++----
>  drivers/crypto/atmel-i2c.h     | 180 +++++----
>  drivers/crypto/atmel-sha204a.c | 284 +++++++-------
>  4 files changed, 1010 insertions(+), 385 deletions(-)
> 
> Signed-off-by: Lothar Rubusch <l.rubusch at gmail.com>

Thanks, but I'm not sure reviewing such a large series is sustainable.
I've only skimmed it, but it also mixes several different things that
should probably be submitted separately (e.g., refactorings and new
features).

Sashiko [1] also reviewed the series and found potential regressions
that might be helpful to consider.

Thanks,
Thorsten

[1] https://sashiko.dev/#/patchset/20260512224349.64621-1-l.rubusch%40gmail.com