[PATCH net-next v4 09/13] net: lan966x: add PCIe FDMA support

[Paolo Abeni]

On 5/9/26 10:27 AM, sashiko-bot at kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 10 potential issue(s) to consider:
>> +static int lan966x_fdma_pci_napi_poll(struct napi_struct *napi, int weight)
>> +{
> [ ... ]
>> +	/* Get all received skbs. */
>> +	while (counter < weight) {
>> +		if (!fdma_has_frames(fdma))
>> +			break;
>> +		/* Order DONE read before DCB/frame reads below. */
>> +		dma_rmb();
>> +		counter++;
>> +		switch (lan966x_fdma_pci_rx_check_frame(rx, &src_port)) {
>> +		case FDMA_PASS:
>> +			break;
>> +		case FDMA_ERROR:
>> +			fdma_dcb_advance(fdma);
>> +			goto allocate_new;
>> +		}
>> +		skb = lan966x_fdma_pci_rx_get_frame(rx, src_port);
>> +		fdma_dcb_advance(fdma);
>> +		if (!skb)
>> +			goto allocate_new;
> 
> If napi_alloc_skb() fails due to memory pressure, does branching to
> allocate_new prematurely break out of the processing loop? Since the hardware
> interrupt was already cleared, and napi_complete_done() is called below,
> will this cause the RX queue to stall permanently for the remaining
> unprocessed frames? Should the code drop the packet and continue instead?

I went over the series and sashiko feedback, and generally speaking the
series LGTM, but I think this one is real and should be addressed.

Also it would be very helpful if you could (for future series/revision)
reply to the (wrong) sashiko comments individually explaining with a few
words why the are off: decoding the context requires much more time for
whoever has not wrote the code itself.

I understand that dealing with AI feedback is a pain, but, paraphrasing
a great aphorisms creator, I can assure you that ours (maintainers) pain
is greater.

Thanks,

Paolo