[PATCH v3 0/3] arm64: dts/bindings: Add support for BeagleBadge

[Judith Mendez]

Hi,

BeagleBoard.org BeagleBadge[1] is a compact, affordable open source
hardware [2] single board computer based on the Texas Instruments AM62L3
SoC designed for IoT and embedded applications. Add base support for
the same.

SD boot:
Link: https://gist.github.com/jmenti/8818fa277597de927dd2b42ab1d2552f

This patch series adds:
- Device tree bindings update for am62l3-badge
- Device tree source for BeagleBadge board
- Defconfig: drivers for BeagleBadge

Changelog since v2:
DTS:
- PWM period: 255ns -> 10000000ns
- vdd_3v3 vin-supply: vsys_out -> vcc_3v3_main
- MCP23S18 reset muxmode: 4 -> 7
- Typo: FUEL_GUAGE_BATLOW -> FUEL_GAUGE_BATLOW
- sdhci2: Remove  #address-cells & #size-cells
Defconfig:
- Move config options as per make savedefconfig

V2
Link: https://lore.kernel.org/all/20260508230341.1891450-1-jm@ti.com/
V1
Link: https://lore.kernel.org/all/20260501233148.4180391-1-jm@ti.com/

Patch series depends on:
Link: https://lore.kernel.org/all/20260513231154.2703292-1-jm@ti.com/

[0] https://beagleboard.org/
[1] https://www.beagleboard.org/boards/beaglebadge
[2] https://github.com/beagleboard/BeagleBadge/blob/main/design/BeagleBadge_RevA_V0.7_SCH_251107.pdf

Judith Mendez (3):
  dt-bindings: arm: ti: Add am62l3-beaglebadge
  arm64: dts: ti: Add k3-am62l3-beaglebadge
  arm64: defconfig: Enable drivers for BeagleBadge

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am62l3-beaglebadge.dts     | 700 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   5 +
 4 files changed, 707 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts

-- 
2.54.0