[PATCH v6 08/10] arm64: dts: lx2160a: add labels to thermal trip-point nodes

[Josua Mayer]

LX2160A SoC dtsi defines rather conservative thermal trip points,
alert at 85°C and critical at 95°C.

This is okay for most boards, however the SoC maximum junction
temperature is 105°C in both commercial and industrial version.

Industrial grade boards need to change the thresholds to avoid premature
thermal shutdown in high-temeprature environments.

Add labels to all thermal trip point nodes, enabling board dts to
reference them and modify properties.

Signed-off-by: Josua Mayer <josua at solid-run.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 3f63fbf2485e5..e2de7e596d2b6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -499,13 +499,13 @@ ddr-ctrl5-thermal {
 			thermal-sensors = <&tmu 1>;
 
 			trips {
-				ddr-cluster5-alert {
+				cluster5_alert: ddr-cluster5-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				ddr-cluster5-crit {
+				cluster5_crit: ddr-cluster5-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -519,13 +519,13 @@ wriop-thermal {
 			thermal-sensors = <&tmu 2>;
 
 			trips {
-				wriop-alert {
+				wriop_alert: wriop-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				wriop-crit {
+				wriop_crit: wriop-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -539,13 +539,13 @@ dce-thermal {
 			thermal-sensors = <&tmu 3>;
 
 			trips {
-				dce-qbman-alert {
+				dce_qbman_alert: dce-qbman-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				dce-qbman-crit {
+				dce_qbman_crit: dce-qbman-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -559,13 +559,13 @@ ccn-thermal {
 			thermal-sensors = <&tmu 4>;
 
 			trips {
-				ccn-dpaa-alert {
+				ccn_dpaa_alert: ccn-dpaa-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				ccn-dpaa-crit {
+				ccn_dpaa_crit: ccn-dpaa-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -579,13 +579,13 @@ cluster4-thermal {
 			thermal-sensors = <&tmu 5>;
 
 			trips {
-				clust4-hsio3-alert {
+				cluster4_alert: clust4-hsio3-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				clust4-hsio3-crit {
+				cluster4_crit: clust4-hsio3-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -599,13 +599,13 @@ cluster2-3-thermal {
 			thermal-sensors = <&tmu 6>;
 
 			trips {
-				cluster2-3-alert {
+				cluster2_3_alert: cluster2-3-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cluster2-3-crit {
+				cluster2_3_crit: cluster2-3-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";

-- 
2.51.0