[PATCH v6 03/10] arm64: dts: lx2162a-clearfog: cleanup superfluous status properties

[Josua Mayer]

The SoC dtsi has always enabled serdes block 1, enabled dpmac and
disabled pcie nodes.

Drop the superfluous status properties on these nodes.

Further drop crypto alias as SoM dtsi already set it.

Signed-off-by: Josua Mayer <josua at solid-run.com>
---
 .../boot/dts/freescale/fsl-lx2162a-clearfog.dts     | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
index f95e9c19bfc75..6fd85a5cac94e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
@@ -14,7 +14,6 @@ / {
 	compatible = "solidrun,lx2162a-clearfog", "solidrun,lx2162a-som", "fsl,lx2160a";
 
 	aliases {
-		crypto = &crypto;
 		i2c0 = &i2c0;
 		i2c1 = &i2c2;
 		i2c2 = &i2c4;
@@ -124,42 +123,36 @@ &dpmac11 {
 	phys = <&serdes_2 0>;
 	phy-handle = <&ethernet_phy3>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &dpmac12 {
 	phys = <&serdes_2 1>;
 	phy-handle = <&ethernet_phy1>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &dpmac13 {
 	phys = <&serdes_2 6>;
 	phy-handle = <&ethernet_phy6>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &dpmac14 {
 	phys = <&serdes_2 7>;
 	phy-handle = <&ethernet_phy8>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &dpmac15 {
 	phys = <&serdes_2 4>;
 	phy-handle = <&ethernet_phy4>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &dpmac16 {
 	phys = <&serdes_2 5>;
 	phy-handle = <&ethernet_phy2>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &dpmac17 {
@@ -170,14 +163,12 @@ &dpmac17 {
 	phys = <&serdes_2 2>;
 	phy-handle = <&ethernet_phy5>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &dpmac18 {
 	phys = <&serdes_2 3>;
 	phy-handle = <&ethernet_phy7>;
 	phy-connection-type = "sgmii";
-	status = "okay";
 };
 
 &emdio1 {
@@ -314,14 +305,6 @@ pcieclk_i2c: i2c at 2 {
 	};
 };
 
-&pcie3 {
-	status = "disabled";
-};
-
-&pcie4 {
-	status = "disabled";
-};
-
 &pcs_mdio3 {
 	status = "okay";
 };
@@ -370,10 +353,6 @@ &pcs_mdio18 {
 	status = "okay";
 };
 
-&serdes_1 {
-	status = "okay";
-};
-
 &serdes_2 {
 	status = "okay";
 };

-- 
2.51.0