[PATCH v3] dt-bindings: iio: adc: Convert xilinx-xadc bindings to YAML schema

[Michal Simek]

On 5/12/26 16:16, David Lechner wrote:
> On 5/12/26 9:10 AM, Michal Simek wrote:
>>
>>
>> On 5/12/26 15:58, David Lechner wrote:
>>> On 5/12/26 7:14 AM, Rob Herring wrote:
>>>> On Mon, May 11, 2026 at 11:24 AM David Lechner <dlechner at baylibre.com> wrote:
>>>>>
>>>>> On 5/11/26 11:15 AM, Jonathan Cameron wrote:
>>>>>> On Sun, 10 May 2026 08:01:36 -0400
>>>>>> Pramod Maurya <pramod.nexgen at gmail.com> wrote:
>>>>>>
>>>>>>> Convert the Xilinx XADC and UltraScale System Monitor device tree binding
>>>>>>> from the legacy plain-text format to a YAML schema, enabling automated
>>>>>>> validation with dt-schema.
>>>>>>>
>>>>>>> The new binding covers the same hardware and compatible strings:
>>>>>>>     - xlnx,zynq-xadc-1.00.a (ZYNQ hardmacro)
>>>>>>>     - xlnx,axi-xadc-1.00.a  (AXI softmacro)
>>>>>>>     - xlnx,system-management-wiz-1.3 (UltraScale System Management Wizard)
>>>>>>>
>>>>>>> Signed-off-by: Pramod Maurya <pramod.nexgen at gmail.com>
>>>>>> Hi Pramod,
>>>>>>
>>>>>> Something went wrong with your sending of v3. I have two versions sent
>>>>>> half a day apart and no idea how they are related.
>>>>>>
>>>>>> Anyhow one of them got feedback from Rob's bot so I'll assume we are
>>>>>> getting a v4 and wait for that.
>>>>>>
>>>>>> Jonathan
>>>>>
>>>>> I think Rob will have to fix the bot to make an exception for the
>>>>> legacy bindings. This should have been called out in the commit message
>>>>> as requested in a previous revision.
>>>>
>>>> The bot is not the problem. It just runs validation. The schemas will
>>>> have to either drop this check (comma's in nodenames) or exclude just
>>>> this property.
>>>>
>>>>
>>>> Rob
>>>
>>> Even though this is an existing text-based schema that has been around
>>> for 12 years with this name already? Changing it could be a breaking
>>> change to existing users. Although there aren't any in any .dts in the
>>> kernel source.
>>
>> Zynq has it described.
>> arch/arm/boot/dts/xilinx/zynq-7000.dtsi:111:                       compatible = "xlnx,zynq-xadc-1.00.a";
>>
>> And make no sense to describe programmable logic which are that other two.
>>
>> Thanks,
>> Michal
> 
> The issue is with the xlnx,channels property name. Searching only shows
> this in the driver and in the examples in the bindings .txt file.

Because it depends on HW design configuration. Different configuration have 
different channels exposed. We are using device tree generator which take 
current design configuration and describe them. zynq-7000.dtsi is generic for 
all boards. I can't remember all details but I wouldn't be surprise if no 
channel is exported on minimal/default designs which are described.

Thanks,
Michal