[PATCH] ARM: OMAP2+: Make OMAP4 finish_suspend callback CFI-safe

[Nathan Chancellor]

On Tue, May 12, 2026 at 12:23:41AM -0400, Mithil Bavishi wrote:
> With CONFIG_CFI enabled, OMAP4 can trap in omap4_enter_lowpower()
> because omap_pm_ops.finish_suspend points directly to the assembly
> routine omap4_finish_suspend, which lacks the expected KCFI type
> metadata.

It sounds like omap4_finish_suspend() should be defined with
SYM_TYPED_FUNC_START then? Is that the case for all of the other
functions that are added to omap_pm_ops?

> Add a small C wrapper with the exact callback prototype and use it for
> finish_suspend.
> 
> Signed-off-by: Mithil Bavishi <bavishimithil at gmail.com>
> ---
>  arch/arm/mach-omap2/omap-mpuss-lowpower.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> index f18ef45e2..1c51b2f97 100644
> --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> @@ -111,6 +111,11 @@ static struct cpu_pm_ops omap_pm_ops = {
>  	.hotplug_restart	= dummy_cpu_resume,
>  };
>  
> +static int omap4_finish_suspend_wrapper(unsigned long cpu_state)
> +{
> +	return omap4_finish_suspend(cpu_state);
> +}
> +
>  /*
>   * Program the wakeup routine address for the CPU0 and CPU1
>   * used for OFF or DORMANT wakeup.
> @@ -437,7 +442,7 @@ int __init omap4_mpuss_init(void)
>  	}
>  
>  	if (cpu_is_omap44xx()) {
> -		omap_pm_ops.finish_suspend = omap4_finish_suspend;
> +		omap_pm_ops.finish_suspend = omap4_finish_suspend_wrapper;
>  		omap_pm_ops.resume = omap4_cpu_resume;
>  		omap_pm_ops.scu_prepare = scu_pwrst_prepare;
>  		omap_pm_ops.hotplug_restart = omap4_secondary_startup;
> -- 
> 2.43.0
> 

-- 
Cheers,
Nathan