[PATCH 0/8] ras: aest: extend AEST support to Device Tree frontend
Umang Chheda
umang.chheda at oss.qualcomm.com
Mon May 11 23:45:47 PDT 2026
Hi Ruidong,
On 5/6/2026 1:40 PM, Ruidong Tian wrote:
> Hi Umang,
>
> Thanks for your patch.
>
> Would it be okay if I include this patch in the next version of the AEST
> patch series? I will make sure to add your Signed-off-by line.
Yes, you can include this patch in the next version - we will represent
it and respond to all of the queries received on DT specific patches.
How should I be sharing the patch fixes based on comments received from
maintainers to you ? so that you can include in your patch series ?
Also, when is your plan to post the next version fixing the comments
received ?
Thanks,
Umang
>
> Best regards,
> Ruidong
>
> 在 2026/5/5 20:23, Umang Chheda 写道:
>> This series extends Tian Ruidong’s [1] ACPI-based AEST support series
>> to also cover Device Tree based platforms.
>>
>> While the existing AEST driver relies on the AEST ACPI table [3], many
>> embedded Arm platforms use Device Tree exclusively and cannot use the
>> driver today. This series adds a DT frontend that mirrors the ACPI
>> implementation and feeds the same core driver, keeping ACPI and DT
>> paths functionally equivalent.
>>
>> Along the way, several correctness issues were identified in the core
>> driver and are fixed in the first part of this series.
>>
>> The DT frontend is mutually exclusive with ACPI and does not introduce
>> any DT-specific logic into the core.
>>
>> How to test with QEMU
>> --------------------------
>> Tian Ruidong's QEMU fork [2] emulates AEST MMIO error records on the
>> virt machine. To test the DT frontend:
>>
>> 1. Build QEMU:
>>
>> git clone https://github.com/winterddd/qemu.git
>> cd qemu
>> git checkout c5e2d5dec9fd62ba622314c40bff0fbecb4dfb34
>> ./configure --target-list=aarch64-softmmu
>> make -j$(nproc)
>>
>> 2. Build the kernel with:
>>
>> CONFIG_OF_AEST=y
>> CONFIG_AEST=y
>> CONFIG_ARM64_RAS_EXTN=y
>> CONFIG_RAS=y
>>
>> 3. Add the following DT node to your virt machine DTB. The QEMU
>> fork maps DRAM error records at 0x090d0000 (SPI 44) and CMN
>> vendor records at 0x090e0000 (SPI 45):
>>
>> aest {
>> compatible = "arm,aest";
>> #address-cells = <2>;
>> #size-cells = <2>;
>> ranges;
>> interrupt-parent = <&gic>;
>>
>> /* DRAM memory node — MMIO at 0x090d0000, SPI 44 */
>> aest-dram0 at 90d0000 {
>> compatible = "arm,aest-memory";
>> arm,interface-type = <1>;
>> arm,group-format = <0>;
>> arm,interface-flags = <0x22>;
>> arm,num-records = <4>;
>> arm,record-impl = /bits/ 64 <0x0>;
>> arm,status-report = /bits/ 64 <0x0>;
>> arm,addr-mode = /bits/ 64 <0x0>;
>> arm,proximity-domain = <0>;
>> reg = <0x0 0x090d0000 0x0 0x1000>,
>> <0x0 0x090d0800 0x0 0x200>,
>> <0x0 0x090d0e00 0x0 0x100>;
>> reg-names = "errblock", "fault-inject",
>> "err-group";
>> interrupts = <GIC_SPI 44
>> IRQ_TYPE_LEVEL_HIGH>;
>> interrupt-names = "fhi";
>> };
>> };
>>
>> 4. Boot QEMU with acpi=off:
>>
>> ./qemu-system-aarch64 \
>> -machine virt,accel=tcg,gic-version=3 \
>> -cpu cortex-a57 -m 2G -smp 4 \
>> -kernel Image -dtb virt-aest.dtb \
>> -append "console=ttyAMA0 acpi=off earlycon" \
>> -nographic
>>
>> 5. Verify probe:
>>
>> dmesg | grep "DT AEST"
>> # Expected: DT AEST: registered 1 AEST error source(s) from DT
>> ls /sys/kernel/debug/aest/
>>
>> 6. Inject a CE error via the QEMU MMIO fault injection registers.
>> The QEMU device accepts 64-bit accesses only (use devmem with
>> the 64-bit width flag):
>>
>> devmem 0x090d0808 64 0x80000040 # CDOFF | CE inject
>>
>> This triggers QEMU's error_record_inj_write() which sets
>> ERR<n>STATUS.V=1 and asserts the IRQ. The kernel driver's
>> aest_irq_func() fires, reads the status, and logs:
>>
>> AEST: {1}[Hardware Error]: Hardware error from AEST memory.90d0000
>> AEST: {1}[Hardware Error]: Error from memory at SRAT proximity
>> domain 0x0
>>
>> Testing
>> -------
>> - Validated on Qualcomm's lemans-evk and monaco-evk board with DT boot.
>> - Validated CE and UE injection via debugfs soft_inject.
>> - Tested ACPI path is unaffected: ACPI boot continues to use
>> drivers/acpi/arm64/aest.c unchanged.
>>
>> [1] https://lore.kernel.org/lkml/20260122094656.73399-1-
>> tianruidong at linux.alibaba.com/
>> [2] https://github.com/winterddd/qemu/tree/error_record
>> [3] https://developer.arm.com/documentation/den0085/0200/
>>
>> Signed-off-by: Umang Chheda <umang.chheda at oss.qualcomm.com>
>> ---
>> Umang Chheda (8):
>> ras: aest: Fix shared processor node handling and error log
>> messages
>> ras: aest: Fix CE/UE error counts not incrementing in debugfs
>> ras: aest: Skip unimplemented records in debugfs
>> ras: aest: Add panic_on_ue module parameter
>> dt-bindings: arm: ras: Introduce bindings for ARM AEST
>> ras: aest: Add DT frontend for ARM AEST RAS error sources
>> arm64: dts: qcom: lemans: add AEST error nodes
>> arm64: dts: qcom: monaco: add AEST error nodes
>>
>> .../devicetree/bindings/arm/arm,aest.yaml | 406 +++++++++++++
>> arch/arm64/boot/dts/qcom/lemans.dtsi | 41 ++
>> arch/arm64/boot/dts/qcom/monaco.dtsi | 41 ++
>> drivers/ras/aest/Kconfig | 15 +-
>> drivers/ras/aest/Makefile | 2 +
>> drivers/ras/aest/aest-core.c | 63 +-
>> drivers/ras/aest/aest-of.c | 673 +++++++++++
>> ++++++++++
>> drivers/ras/aest/aest-sysfs.c | 27 +-
>> drivers/ras/aest/aest.h | 15 +-
>> include/dt-bindings/arm/aest.h | 43 ++
>> 10 files changed, 1310 insertions(+), 16 deletions(-)
>> ---
>> base-commit: a67b7fd0dd1f6ccf3d128dc2099cdb07af1f6a09
>> change-id: 20260505-aest-devicetree-support-a3722d90e1f5
>> prerequisite-message-id: <20260122094656.73399-1-
>> tianruidong at linux.alibaba.com>
>> prerequisite-patch-id: c5a7c6431c6c1e6351241e694ee053800039d41d
>> prerequisite-patch-id: 1f6e2c20829eee41a210dd8a538f1e8efcc65872
>> prerequisite-patch-id: 5556287e3f46c2ed2c0431c53c7782e87bcbd866
>> prerequisite-patch-id: 2edae0a136d7779b8f686181720e71d044a73311
>> prerequisite-patch-id: b5190b2844dcb01e72f87a59f3a29548795fdb82
>> prerequisite-patch-id: 7ba848583708b2ae776a7ce847bb056e3de7f77b
>> prerequisite-patch-id: 397e5b22802b67942435f4f2968f0b1e210ba0e8
>> prerequisite-patch-id: 2169f4b65537eecbd0ccbd2ad6b28c64ec44655d
>> prerequisite-patch-id: b626f85d98747595b3240bc49e6ad9c9dd5c0fa9
>> prerequisite-patch-id: 1323dfd2eebad2ef6514dbbce58ba08e8859f894
>> prerequisite-patch-id: 95b826e5e329408437a3ef336c4f45d4d74f82bb
>> prerequisite-patch-id: b60ff489a5a33c5d5220fa8144af7b7511769cba
>> prerequisite-patch-id: 43f35a52b8a3d13c938ff08083403c1d3bd0df8b
>> prerequisite-patch-id: c55d4e9117ca36d3c2cba82d550a618cb82bb745
>> prerequisite-patch-id: 3885e10f318ae8101d6909b35d92a976cc359e3c
>> prerequisite-patch-id: 92958cde05577f069c5659018a274bb39cfb6b24
>>
>> Best regards,
>> --
>> Umang Chheda <umang.chheda at oss.qualcomm.com>
>>
>
More information about the linux-arm-kernel
mailing list