[PATCH v3 0/4] remoteproc: add Cortex-A Core remoteproc support on i.MX platforms

[Jiafei Pan]

This patch series is to add remoteproc support on Cortex-A Core of i.MX platforms:
1. Adding dts binding for Cortex-A Core remoteproc
2. Enable Cortex-A Core remoteproc support in remoteproc driver
3. Adding dts example on imx93 platforms.

Signed-off-by: Jiafei Pan <Jiafei.Pan at nxp.com>

---
Changes in v3:
- Fixed dt_binding_check warnings
- Updated prefix of patch subject

Changes in v2:
- Update arch/arm64/boot/dts/freescale/Makefile to add new dts

---
Hou Zhiqiang (1):
  remoteproc: imx_rproc: add autoboot support for A-core

Jiafei Pan (3):
  dt-bindings: remoteproc: add imx-rproc-psci
  remoteproc: imx_rproc: add support for Cortex-A Core
  arm64: dts: imx93: Cortex-A Core remoteproc device node

 .../remoteproc/fsl,imx-rproc-psci.yaml        |  51 ++++++
 arch/arm64/boot/dts/freescale/Makefile        |   2 +
 .../imx93-11x11-evk-multicore-rtos.dts        |  39 +++++
 .../imx93-14x14-evk-multicore-rtos.dts        |  39 +++++
 .../boot/dts/freescale/imx93-rproc-ca55.dtsi  |  14 ++
 drivers/remoteproc/imx_rproc.c                | 150 ++++++++++++++++++
 drivers/remoteproc/imx_rproc.h                |   2 +
 7 files changed, 297 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc-psci.yaml
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk-multicore-rtos.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-14x14-evk-multicore-rtos.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-rproc-ca55.dtsi

-- 
2.43.0