[PATCH 4/5] arm64: dts: freescale: imx952-evk: Add IMX-AUD-IO board support

[Chancel Liu]

IMX-AUD-IO is a daughter board which can be connected to i.MX952 EVK
through a physical connector. This connector is described as a
fsl,io-connector connector to expose a constrained subset of GPIO and
clock resources to daughter board using fixed electrical wiring.

Also add required regulator, sound CPU DAI and I2C bus configuration to
support IMX-AUD-IO on this base board.

Signed-off-by: Chancel Liu <chancel.liu at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx952-evk.dts | 68 +++++++++++++++++++-
 1 file changed, 66 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx952-evk.dts b/arch/arm64/boot/dts/freescale/imx952-evk.dts
index 62d1c1c7c501..bb1d8d5f5fcf 100644
--- a/arch/arm64/boot/dts/freescale/imx952-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx952-evk.dts
@@ -43,6 +43,17 @@ aliases {
 		spi6 = &lpspi7;
 	};
 
+	aud_io_conn: aud-io-connector {
+		compatible = "fsl,io-connector";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-map = <0 0 &pcal6416 8 1>;
+		gpio-map-mask = <0xff 0x0>;
+		gpio-map-pass-thru = <0x0 0x1>;
+		#clock-cells = <1>;
+		clock-map = <0 &scmi_clk IMX952_CLK_SAI2>;
+	};
+
 	bt_sco_codec: audio-codec-bt-sco {
 		#sound-dai-cells = <1>;
 		compatible = "linux,bt-sco";
@@ -114,13 +125,29 @@ reg_1p8v: regulator-1p8v {
 		regulator-name = "+V1.8_SW";
 	};
 
-	reg_vref_1v8: regulator-adc-vref {
+	aud_io_reg_1v8: reg_vref_1v8: regulator-adc-vref {
 		compatible = "regulator-fixed";
 		regulator-name = "vref_1v8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
+	aud_io_reg_3v3: regulator-aud-io-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "aud-io-3v3";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pcal6416 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	aud_io_reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "aud-io-5v";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
 	reg_audio_pwr: regulator-audio-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "audio-pwr";
@@ -323,7 +350,7 @@ i2c4_pcal6408: gpio at 21 {
 	};
 };
 
-&lpi2c6 {
+aud_io_i2c: &lpi2c6 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpi2c6>;
@@ -468,6 +495,27 @@ &sai1 {
 	status = "okay";
 };
 
+aud_io_cpu: &sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	clocks = <&scmi_clk IMX952_CLK_BUSNETCMIX>, <&clk_dummy>,
+		 <&scmi_clk IMX952_CLK_SAI2>, <&clk_dummy>,
+		 <&clk_dummy>, <&scmi_clk IMX952_CLK_AUDIOPLL1>,
+		 <&scmi_clk IMX952_CLK_AUDIOPLL2>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	assigned-clocks = <&scmi_clk IMX952_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX952_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX952_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX952_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX952_CLK_SAI2>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX952_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-asynchronous;
+};
+
 &sai3 {
 	assigned-clocks = <&scmi_clk IMX952_CLK_AUDIOPLL1_VCO>,
 			  <&scmi_clk IMX952_CLK_AUDIOPLL2_VCO>,
@@ -688,6 +736,22 @@ IMX952_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_13		0x51e
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX952_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK		0x31e
+			IMX952_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC		0x31e
+			IMX952_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_0	0x31e
+			IMX952_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_1	0x31e
+			IMX952_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK		0x31e
+			IMX952_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC	0x31e
+			IMX952_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_0	0x31e
+			IMX952_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_1	0x31e
+			IMX952_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_2	0x31e
+			IMX952_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_3	0x31e
+			IMX952_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK		0x31e
+		>;
+	};
+
 	pinctrl_sai3: sai3grp {
 		fsl,pins = <
 			IMX952_PAD_GPIO_IO17__WAKEUPMIX_TOP_SAI3_MCLK			0x31e
-- 
2.50.1