[PATCH 4/5] ARM: dts: qcom: msm8974-oneplus-bacon: Fix sn3193 shutdown GPIO polarity

[Jun Yan]

The sn3193 shutdown pin is active-low[1]. Correct the GPIO flags
from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW to match the hardware.

[1] https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf

Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Jun Yan <jerrysteve1101 at gmail.com>
---
 arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 258bbbecd927..c528d42bade5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -147,7 +147,7 @@ led-controller at 68 {
 		compatible = "si-en,sn3193";
 		reg = <0x68>;
 
-		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.54.0