[PATCH v2 0/7] Add Hamoa Evk IMX577 camera sensor support

[Wenmeng Liu]

Hamoa EVK is  based on the Qualcomm X1e80100 SoC.
It lacks a camera sensor in its default configuration.
This series enables the IMX577 sensor via CSIPHY1 through device tree overlay.

We have tested IMX577 Sensor on CCI1 with following commands:
- media-ctl -d /dev/media0 --reset
- media-ctl -d /dev/media0 -V '"imx577 1-001a":0[fmt:SRGGB10/4056x3040 field:none]'
- media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
- media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5

Dependencies: https://lore.kernel.org/all/20260507-purwa-videocc-camcc-v5-0-fc3af4130282@oss.qualcomm.com/

Signed-off-by: Wenmeng Liu <wenmeng.liu at oss.qualcomm.com>
---
Changes in v2:
- Drop src clk.
- Fix typo. -- Konrad
- Port the code offor Bryan's IOMMU, CCI, and CAMSS.
- Add mclk define.
- Use the unrefactored csiphy.
- Link to v1: https://lore.kernel.org/r/20260227-hamoa_evk-v1-0-36f895a24d8f@oss.qualcomm.com

---
Bryan O'Donoghue (3):
      dt-bindings: media: qcom,x1e80100-camss: Describe iommu entries
      arm64: dts: qcom: x1e80100: Add CCI definitions
      Add dtsi to describe the xe180100 CAMSS block

Tingguo Cheng (1):
      arm64: dts: qcom: hamoa-iot-som: Add pm8010 L4M regulator

Wenmeng Liu (3):
      dt-bindings: media: qcom: x1e80100-camss: drop src clock
      arm64: dts: qcom: hamoa: Add camera MCLK pinctrl
      arm64: dts: qcom: hamoa-iot-evk-camera-imx577: Add DT overlay

 .../bindings/media/qcom,x1e80100-camss.yaml        |  31 +-
 arch/arm64/boot/dts/qcom/Makefile                  |   5 +
 .../boot/dts/qcom/hamoa-iot-evk-camera-imx577.dtso |  74 +++++
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts         |   7 +
 arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi        |  15 +
 arch/arm64/boot/dts/qcom/hamoa.dtsi                | 368 +++++++++++++++++++++
 6 files changed, 489 insertions(+), 11 deletions(-)
---
base-commit: b25f15a8600145233c948b40cab6d7d57bac3076
change-id: 20260227-hamoa_evk-2455daf43d86
prerequisite-change-id: 20260506-purwa-videocc-camcc-fef043727e4c:v5
prerequisite-patch-id: 61bdb45446193b72dd8a4b093e4ab2f78db2f066
prerequisite-patch-id: b5be9dcbb612a14108f890b2782860847edfcbe4
prerequisite-patch-id: a03b10745ba5c628d09fc5278aef832864e31823
prerequisite-patch-id: 026db5dd71d5b0472225ba72c8ba2781334143a9
prerequisite-patch-id: fecc5a4a13c8e1c35ddd2f35e7469a327ead3b82
prerequisite-patch-id: 24424189b11acee204622997908d85a0efbb2503

Best regards,
-- 
Wenmeng Liu <wenmeng.liu at oss.qualcomm.com>