[PATCH v3 1/4] dt-bindings: raspberrypi,bcm2835-firmware: Add bcm2712-firmware compatible

[Conor Dooley]

On Thu, May 07, 2026 at 09:42:54AM +0200, Gregor Herburger wrote:
> On Wed, May 06, 2026 at 05:50:42PM +0100, Conor Dooley wrote:
> > On Wed, May 06, 2026 at 02:28:15PM +0200, Gregor Herburger wrote:
> > > Add a compatible string for the bcm2712 firmware.
> > > 
> > > Signed-off-by: Gregor Herburger <gregor.herburger at linutronix.de>
> > > ---
> > >  .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml      | 13 ++++++++++---
> > >  1 file changed, 10 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> > > index 983ea80eaec9..fbcfa2bc168a 100644
> > > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> > > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> > > @@ -21,9 +21,16 @@ select:
> > >  
> > >  properties:
> > >    compatible:
> > > -    items:
> > > -      - const: raspberrypi,bcm2835-firmware
> > > -      - const: simple-mfd
> > > +    oneOf:
> > > +      - items:
> > > +          - enum:
> > > +              - raspberrypi,bcm2712-firmware
> > > +              - raspberrypi,bcm2835-firmware
> > > +          - const: simple-mfd
> > > +      - items:
> > > +          - const: raspberrypi,bcm2712-firmware
> > > +          - const: raspberrypi,bcm2835-firmware
> > > +          - const: simple-mfd
> > 
> > This diff doesn't make sense, either the new firmware is compatible with
> > the old one or it is not. It shouldn't appear twice.
> 
> Ok. I will change it to:
> -    items:
> -      - const: raspberrypi,bcm2835-firmware
> -      - const: simple-mfd
> +    oneOf:
> +      - items:
> +          - const: raspberrypi,bcm2835-firmware
> +          - const: simple-mfd
> +      - items:
> +          - const: raspberrypi,bcm2712-firmware
> +          - const: raspberrypi,bcm2835-firmware
> +          - const: simple-mfd
> 
> While reading the writing-schema.rst documentation I saw that it says most
> bindings shouldn't need a select. Imho the select in this file doesn't add
> anything which isn't covered witht the compatible. I wonder if I should drop the
> select block?

That shouldn't be required, other simple-mfd users do not have it.
Remove it and run dt_binding_check just to be sure. It'd be a separate
patch from this one FWIW.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20260507/f5ef4684/attachment.sig>