[PATCH v4 3/4] arm: dts: allwinner: d1s-t113: add hstimer node

[Michal Piekos]

Describe high speed timer block on Allwinner D1S-T113.

Tested on LCPI-PC-T113/F113:
- hstimer is registered as clocksource
- switching clocksource at runtime works
- after rating increase hstimer operates as a broadcast clockevent device

Signed-off-by: Michal Piekos <michal.piekos at mmpsystems.pl>
---
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 82cc85acccb1..a849b0380386 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -295,6 +295,15 @@ timer: timer at 2050000 {
 			clocks = <&dcxo>;
 		};
 
+		hstimer at 3008000 {
+			compatible = "allwinner,sun20i-d1-hstimer";
+			reg = <0x03008000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HSTIMER>;
+			resets = <&ccu RST_BUS_HSTIMER>;
+		};
+
 		wdt: watchdog at 20500a0 {
 			compatible = "allwinner,sun20i-d1-wdt-reset",
 				     "allwinner,sun20i-d1-wdt";

-- 
2.43.0