[PATCH 09/10] m68k: stmark2: enable DACs outputs

[Jonathan Cameron]

On Mon, 04 May 2026 19:16:47 +0200
Angelo Dureghello <angelo at kernel-space.org> wrote:

> From: Angelo Dureghello <adureghello at baylibre.com>
> 
> Enabled DAC0 and DAC1 outpus disabling shared ADC inputs on ADC3 and ADC7.
> 
> Signed-off-by: Angelo Dureghello <adureghello at baylibre.com>
> ---
>  arch/m68k/coldfire/stmark2.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/m68k/coldfire/stmark2.c b/arch/m68k/coldfire/stmark2.c
> index 30da9bcbfd63..8fdfb9415cd7 100644
> --- a/arch/m68k/coldfire/stmark2.c
> +++ b/arch/m68k/coldfire/stmark2.c
> @@ -137,6 +137,8 @@ static struct platform_device *stmark2_devices[] __initdata = {
>   */
>  static int __init init_stmark2(void)
>  {
> +	uint16_t val;
> +
>  	/* DSPI0, all pins as DSPI, and using CS1 */
>  	__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
>  	__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
> @@ -149,6 +151,12 @@ static int __init init_stmark2(void)
>  	/* CAN pads */
>  	__raw_writeb(0x50, MCFGPIO_PAR_CANI2C);
>  
> +	/* Enable DAC0 and 1 */

If it is useful to have a comment here at all I think it should also
mention disabling the ADC inputs.  Or take the view that given
well named defines no need to have any comment. 

> +	val = __raw_readw(MCF_CCM_MISCCR2);
> +	val &= ~(MCF_CCM_MISCCR2_ADC3_EN | MCF_CCM_MISCCR2_ADC7_EN);
> +	val |= MCF_CCM_MISCCR2_DAC0_SEL | MCF_CCM_MISCCR2_DAC1_SEL;
> +	__raw_writew(val, MCF_CCM_MISCCR2);
> +
>  	platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
>  
>  	spi_register_board_info(stmark2_board_info,
>