[PATCH v2 1/5] arm64: dts: rockchip: Add USB nodes for RK3528

[Heiko Stuebner]

From: Jonas Karlman <jonas at kwiboo.se>

Rockchip RK3528 has one USB 3.0 DWC3 controller and oneUSB 2.0 EHCI/OHCI
controller and uses an Innosilicon-USB2PHY for USB 2.0. The DWC3
controller additionally uses the Naneng Combo PHY for USB3.

Add device tree nodes to describe these USB controllers along with the
USB 2.0 PHYs.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3528.dtsi | 77 ++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index 806b8109f67d..8823df18f66e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -336,6 +336,30 @@ pcie_intc: legacy-interrupt-controller {
 			};
 		};
 
+		usb_host0_xhci: usb at fe500000 {
+			compatible = "rockchip,rk3528-dwc3", "snps,dwc3";
+			reg = <0x0 0xfe500000 0x0 0x400000>;
+			clocks = <&cru CLK_REF_USB3OTG>,
+				 <&cru CLK_SUSPEND_USB3OTG>,
+				 <&cru ACLK_USB3OTG>;
+			clock-names = "ref_clk", "suspend_clk", "bus_clk";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_A_USB3OTG>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis_rxdet_inp3_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,parkmode-disable-hs-quirk;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller at fed01000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0xfed01000 0 0x1000>,
@@ -349,6 +373,30 @@ gic: interrupt-controller at fed01000 {
 			#interrupt-cells = <3>;
 		};
 
+		usb_host0_ehci: usb at ff100000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xff100000 0x0 0x40000>;
+			clocks = <&cru HCLK_USBHOST>, <&cru HCLK_USBHOST_ARB>,
+				 <&usb2phy>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb2phy_host>;
+			phy-names = "usb";
+			power-domains = <&power RK3528_PD_VO>;
+			status = "disabled";
+		};
+
+		usb_host0_ohci: usb at ff140000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xff140000 0x0 0x40000>;
+			clocks = <&cru HCLK_USBHOST>, <&cru HCLK_USBHOST_ARB>,
+				 <&usb2phy>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb2phy_host>;
+			phy-names = "usb";
+			power-domains = <&power RK3528_PD_VO>;
+			status = "disabled";
+		};
+
 		qos_crypto_a: qos at ff200000 {
 			compatible = "rockchip,rk3528-qos", "syscon";
 			reg = <0x0 0xff200000 0x0 0x20>;
@@ -1273,6 +1321,35 @@ combphy: phy at ffdc0000 {
 			rockchip,pipe-phy-grf = <&pipe_phy_grf>;
 			status = "disabled";
 		};
+
+		usb2phy: usb2phy at ffdf0000 {
+			compatible = "rockchip,rk3528-usb2phy";
+			reg = <0x0 0xffdf0000 0x0 0x10000>;
+			clocks = <&cru CLK_REF_USBPHY>, <&cru PCLK_USBPHY>;
+			clock-names = "phyclk", "pclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy_480m";
+			power-domains = <&power RK3528_PD_VO>;
+			rockchip,usbgrf = <&vo_grf>;
+			status = "disabled";
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
 	};
 };
 
-- 
2.47.3