[PATCH v4 1/5] dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers

[Chen-Yu Tsai]

Hi,

Just some nitpicks.

On Mon, May 4, 2026 at 1:03 PM Mikhail Kalashnikov <iuncuim at gmail.com> wrote:
>
> Add dt-bindings description of the thermal sensors in the A523 processor.

Add an empty line to separate the "what" from the context.

> The controllers require activation of the additional frequency of the
> associated gpadc controller, so a mod clock property required.
>
> The calibration data is split into two cells that are in different areas
> of nvmem. Both controllers require access to both memory cell, so a new
> property nvmem-cells has been added. To maintain backward compatibility,
> the name of the old cell remains the same and the new nvmem-cell-names is
> called calibration-second-part

Missing a period here. Also might be better to explicitly say that the
calibration data for both controllers are scattered in these two cells
at different offsets, hence the need for different compatible strings.

Otherwise,

Reviewed-by: Chen-Yu Tsai <wens at kernel.org>

> Signed-off-by: Mikhail Kalashnikov <iuncuim at gmail.com>
> ---
>  .../thermal/allwinner,sun8i-a83t-ths.yaml     | 54 +++++++++++++++++--
>  1 file changed, 51 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> index 3e61689f6..6020413c3 100644
> --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> @@ -24,6 +24,8 @@ properties:
>        - allwinner,sun50i-h5-ths
>        - allwinner,sun50i-h6-ths
>        - allwinner,sun50i-h616-ths
> +      - allwinner,sun55i-a523-ths0
> +      - allwinner,sun55i-a523-ths1
>
>    clocks:
>      minItems: 1
> @@ -47,11 +49,16 @@ properties:
>      maxItems: 1
>
>    nvmem-cells:
> -    maxItems: 1
> -    description: Calibration data for thermal sensors
> +    minItems: 1
> +    items:
> +      - description: Calibration data for thermal sensors
> +      - description: Additional cell in case of separate calibration data
>
>    nvmem-cell-names:
> -    const: calibration
> +    minItems: 1
> +    items:
> +      - const: calibration
> +      - const: calibration-second-part
>
>    allwinner,sram:
>      maxItems: 1
> @@ -107,6 +114,7 @@ allOf:
>              enum:
>                - allwinner,sun8i-h3-ths
>                - allwinner,sun20i-d1-ths
> +              - allwinner,sun55i-a523-ths0
>
>      then:
>        properties:
> @@ -132,6 +140,29 @@ allOf:
>          - clock-names
>          - resets
>
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - allwinner,sun55i-a523-ths0
> +              - allwinner,sun55i-a523-ths1
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +        nvmem-cells:
> +          minItems: 2
> +        nvmem-cell-names:
> +          minItems: 2
> +    else:
> +      properties:
> +        nvmem-cells:
> +          maxItems: 1
> +        nvmem-cell-names:
> +          items:
> +            - const: calibration
> +
>  required:
>    - compatible
>    - reg
> @@ -176,4 +207,21 @@ examples:
>          #thermal-sensor-cells = <1>;
>      };
>
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/sun55i-a523-ccu.h>
> +    #include <dt-bindings/reset/sun55i-a523-ccu.h>
> +
> +    thermal-sensor at 2009400 {
> +      compatible = "allwinner,sun55i-a523-ths1";
> +      reg = <0x02009400 0x400>;
> +      interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
> +      clock-names = "bus", "mod";
> +      resets = <&ccu RST_BUS_THS>;
> +      nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
> +      nvmem-cell-names = "calibration",
> +             "calibration-second-part";
> +      #thermal-sensor-cells = <1>;
> +    };
>  ...
> --
> 2.54.0
>