[PATCH v4 1/4] arm64: dts: ti: k3-am62a7-sk: Split r5f memory region

[Nishanth Menon]

On 15:22-20260429, Markus Schneider-Pargmann (TI) wrote:
> Split the firmware memory region in more specific parts so it is better
> described where to find which information. Specifically the LPM metadata
> region is important as bootloader software like U-Boot has to know where
> that data is to be able to read that data.
> 
> Signed-off-by: Markus Schneider-Pargmann (TI) <msp at baylibre.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 40 +++++++++++++++++++++++++++++++--
>  1 file changed, 38 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index c1e9067b3bdd5ab0591541d4685bb17a5dac4f65..6f2ee93c7be141ee5ae3f1e3324d3a060db069f6 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -59,9 +59,33 @@ wkup_r5fss0_core0_dma_memory_region: memory at 9c800000 {
>  			no-map;
>  		};
>  
> -		wkup_r5fss0_core0_memory_region: memory at 9c900000 {
> +		wkup_r5fss0_core0_ipc_region: memory at 9c900000 {

Looks like you have'nt addressed Vignesh's comments from previous
revision.

https://lore.kernel.org/all/DHS46FH9ZYZB.3BG6HVH832NAE@baylibre.com/

We dropped wkup_r5fss0_core0_memory_region here..

>  #include "k3-am62a-ti-ipc-firmware.dtsi"
In this file:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git/tree/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi#n27
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git/tree/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi#n68

I am not clear where wkup_r5fss0_core0_memory_region is now defined.
BUT, in the patch, we introduce:

> +
> +&wkup_r5fss0_core0 {
> +	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
> +			<&wkup_r5fss0_core0_ipc_region>,
> +			<&wkup_r5fss0_core0_lpm_fs_stub_region>,
> +			<&wkup_r5fss0_core0_lpm_metadata_region>,
> +			<&wkup_r5fss0_core0_lpm_rest_region>,
> +			<&wkup_r5fss0_core0_dm_region>;
> +	memory-region-names = "dma", "ipc", "lpm-stub",
> +			      "lpm-metadata", "lpm-context",
> +			      "dm-firmware";
> +};


So we go ahead an override the definitions of ipc-firmware.dtsi for
wkup_r5fss0_core0 here - explaining why the build does'nt fail. I am
confused why the ipc firmware dtsi was'nt updated instead? is this
something different firmware dtsi now? if so, we should split the
ipc-firmware.dtsi accordingly. Commit message does'nt mention the same
either. This right solution is to make up our minds if ipc-firmware.dtsi
is meant for LPM mode support or not. if not, split the dtsi, if yes, do
the mods in the ipc.dtsi

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource