[PATCH 12/13] arm64: dts: ti: k3-j722s-evm: fix USB clocking for compliance

[Siddharth Vadapalli]

From: Luis Parga <luis.parga at ti.com>

According to section "6.5.3 Normative Spread Spectrum Clocking (SSC)" of
the USB 3.2 Specification, SSC should be enabled by default. This protects
against EMI violations. Hence, enable internal SSC for USB SuperSpeed.

Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Cc: <stable at vger.kernel.org>
Signed-off-by: Luis Parga <luis.parga at ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index e66330c71593..de62b7e135c6 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -746,6 +746,11 @@ &serdes_ln_ctrl {
 
 &serdes_wiz0 {
 	status = "okay";
+	ti,core-clk-sel = <1>;  /* Select internal reference clock */
+	ti,ssc-enable; /* Enable SSC */
+	ti,ssc-type = <1>; /* 1 for Downspread */
+	ti,ssc-frequency-hz = <33000>; /* 33 KHz */
+	ti,ssc-depth-per-mil = <5>; /* 0.5% depth */
 };
 
 &serdes0 {
@@ -754,6 +759,7 @@ serdes0_usb_link: phy at 0 {
 		cdns,num-lanes = <1>;
 		#phy-cells = <0>;
 		cdns,phy-type = <PHY_TYPE_USB3>;
+		cdns,ssc-mode = <2>; /* 2 for internal SSC */
 		resets = <&serdes_wiz0 1>;
 	};
 };
-- 
2.51.1