[PATCH 09/10] m68k: stmark2: enable DACs outputs

[Greg Ungerer]

Hi Angelo,

On 5/5/26 03:16, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello at baylibre.com>
> 
> Enabled DAC0 and DAC1 outpus disabling shared ADC inputs on ADC3 and ADC7.
> 
> Signed-off-by: Angelo Dureghello <adureghello at baylibre.com>
> ---
>   arch/m68k/coldfire/stmark2.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/arch/m68k/coldfire/stmark2.c b/arch/m68k/coldfire/stmark2.c
> index 30da9bcbfd63..8fdfb9415cd7 100644
> --- a/arch/m68k/coldfire/stmark2.c
> +++ b/arch/m68k/coldfire/stmark2.c
> @@ -137,6 +137,8 @@ static struct platform_device *stmark2_devices[] __initdata = {
>    */
>   static int __init init_stmark2(void)
>   {
> +	uint16_t val;
> +
>   	/* DSPI0, all pins as DSPI, and using CS1 */
>   	__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
>   	__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
> @@ -149,6 +151,12 @@ static int __init init_stmark2(void)
>   	/* CAN pads */
>   	__raw_writeb(0x50, MCFGPIO_PAR_CANI2C);
>   
> +	/* Enable DAC0 and 1 */
> +	val = __raw_readw(MCF_CCM_MISCCR2);
> +	val &= ~(MCF_CCM_MISCCR2_ADC3_EN | MCF_CCM_MISCCR2_ADC7_EN);
> +	val |= MCF_CCM_MISCCR2_DAC0_SEL | MCF_CCM_MISCCR2_DAC1_SEL;
> +	__raw_writew(val, MCF_CCM_MISCCR2);
> +
>   	platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
>   
>   	spi_register_board_info(stmark2_board_info,

Same comment applies here with regards using mcfreadX/mcf_writeX as to the
driver itself. Uses of __raw_readX and __raw_writeX will be changed in the
very near future to use mcf_readX/mcf_writeX.

See the those patches at:
https://lore.kernel.org/linux-m68k/209d0653-6386-4b64-9e15-e358f84453ab@app.fastmail.com/T/#t

Regards
Greg