[PATCH 0/7] gpio: siul2-s32g2: add initial GPIO driver

[Khristine Andreea Barbulescu]

This patch series adds support for basic GPIO
operations(set, get, direction_output/input, set_config).

There are two SIUL2 hardware modules: SIUL2_0 and SIUL2_1.
However, this driver exports both as a single GPIO driver.
This is because the interrupt registers are located only
in SIUL2_1, even for GPIOs that are part of SIUL2_0.

There are two gaps in the GPIO ranges:
- 102-111(inclusive) are invalid
- 123-143(inclusive) are invalid

Writing and reading GPIO values is done via the PGPDO/PGPDI
registers(Parallel GPIO Pad Data Output/Input) which are
16 bit registers, each bit corresponding to a GPIO.

Note that the PGPDO order is similar to a big-endian grouping
of two registers:
PGPDO1, PGPDO0, PGPDO3, PGPDO2, PGPDO5, PGPDO4, gap, PGPDO6.

v9 -> v8
- remove the SIUL2 syscon child nodes from the
device tree and DT bindings
- remove syscon child handling from the MFD
and pinctrl drivers
- remove the MFD driver and use a single monolithic
pinctrl/gpio/irqchip driver
- add a new compatible for the pinctrl+gpio binding
while keeping the previous compatible for the legacy
pinctrl-only binding
- update bindings to include the PGPDO/PGPDI and
IRQ register regions in the DT node for the
pinctrl/gpio/irq binding
- add IRQ-related entries in the bindings to
document the intended hierarchy; IRQ support
itself will be added in a future patch series
- update DT nodes to match the new hierarchy and
compatible scheme
- fix dtb warnings
- reorder commits: bug fixes, API changes, DT bindings,
driver implementation, DTS changes
- split commits further to separate minor
style-only adjustments

v8 -> v7
- remove all ': true' lines from properties in dt bindings
- remove NVMEM MFD cell from SIUL2 in dtsi
- remove NVMEM driver and configs
- expose SoC information via syscon cells SIUL2_0
and SIUL2_1 in MFD driver
- add SIUL2_0 and SIUL2_1 syscon nodes in dtsi
- add patternProperties for "^siul2_[0-1]$" for syscon nodes
- update example to include syscon cells with proper format
- remove `reg` property from pinctrl node in dt binding
- update Kconfig help text to reflect new syscon structure
instead of NVMEM for SoC information
- squash deprecated SIUL2 pinctrl binding with new MFD binding
- dropped "nxp,s32g3-siul2" from MFD driver match table
- fixed commit messages
- fixed dtb warnings

v7 -> v6
- fixed MAINTAINERS wrong file path
- add unevaluatedProperties, change siul2 node name, remove
  jtag_pins label in the device tree schema
- change compatible definition in schema
- change node name in dtsi
- mentioned binding deprecation in commit messages
- split mfd cell conversion commit in two: one for the
  previous refactoring, one for the mfd cell conversion
- removed Acked-by: Linus Walleij from commit:
  "pinctrl: s32: convert the driver into an mfd cell"
  because of changes to that commit
- deprecate the nxp,s32g2-siul2-pinctrl binding
- add NVMEM MFD cell for SIUL2
- made the GPIO driver not export invalid pins
  (there are some gaps 102-111, 123-143)
- removed the need for gpio-reserved-ranges
- force initialized pinctrl_desc->num_custom_params to 0

v6 -> v5
- removed description for reg in the dt-bindings and added
  maxItems
- dropped label for example in the dt-bindings
- simplified the example in the dt-bindings
- changed dt-bindings filename to nxp,s32g2-siul2.yaml
- changed title in the dt-bindings
- dropped minItmes from gpio-ranges/gpio-reserved-ranges
  and added maxItems to gpio-reserved-ranges
- added required block for -grp[0-9]$ nodes
- switch to using "" as quotes
- kernel test robot: fixed frame sizes, added description
  for reg_name, fixed typo in gpio_configs_lock, removed
  uninitialized ret variable usage
- ordered includes in nxp-siul2.c, switched to dev-err-probe
  added a mention that other commits will add nvmem functionality
  to the mfd driver
- switched spin_lock_irqsave to scoped_guard statement
- switched dev_err to dev_err_probe in pinctrl-s32cc in places
  reached during the probing part

v5 -> v4
- fixed di_div error
- fixed dt-bindings error
- added Co-developed-by tags
- added new MFD driver nxp-siul2.c
- made the old pinctrl driver an MFD cell
- added the GPIO driver in the existing SIUL2 pinctrl one
- Switch from "devm_pinctrl_register" to
  "devm_pinctrl_register_and_init"

v4 -> v3
- removed useless parentheses
- added S32G3 fallback compatible
- fixed comment alignment
- fixed dt-bindings license
- fixed modpost: "__udivdi3"
- moved MAINTAINERS entry to have the new GPIO driver
  together with other files related to S32G

v3 -> v2
- fix dt-bindings schema id
- add maxItems to gpio-ranges
- removed gpio label from dt-bindings example
- added changelog for the MAINTAINERS commit and
  added separate entry for the SIUL2 GPIO driver
- added guard(raw_spinlock_irqsave) in
  'siul2_gpio_set_direction'
- updated the description for
  'devm_platform_get_and_ioremap_resource_byname'

v2 -> v1
dt-bindings:
- changed filename to match compatible
- fixed commit messages
- removed dt-bindings unnecessary properties descriptions
- added minItems for the interrupts property
driver:
- added depends on ARCH_S32 || COMPILE_TEST to Kconfig
- added select REGMAP_MMIO to Kconfig
- remove unnecessary include
- add of_node_put after `siul2_get_gpio_pinspec`
- removed inline from function definitions
- removed match data and moved the previous platdata
  definition to the top of the file to be visible
- replace bitmap_set/clear with __clear_bit/set_bit
  and devm_bitmap_zalloc with devm_kzalloc
- switched to gpiochip_generic_request/free/config
- fixed dev_err format for size_t reported by
  kernel test robot
- add platform_get_and_ioremap_resource_byname wrapper
Andrei Stefanescu (2):
  pinctrl: s32cc: change to "devm_pinctrl_register_and_init"
  pinctrl: s32cc: implement GPIO functionality

Khristine Andreea Barbulescu (5):
  pinctrl: s32cc: use dev_err_probe() and improve error messages
  pinctrl: s32cc: add/fix some comments
  pinctrl: s32cc: remove inline specifiers
  dt-bindings: pinctrl: s32g2-siul2: describe GPIO and EIRQ resources
  arm64: dts: s32g: describe GPIO and EIRQ resources in SIUL2 pinctrl
    node

 .../pinctrl/nxp,s32g2-siul2-pinctrl.yaml      | 107 ++-
 arch/arm64/boot/dts/freescale/s32g2.dtsi      |  26 +-
 arch/arm64/boot/dts/freescale/s32g3.dtsi      |  26 +-
 drivers/pinctrl/nxp/pinctrl-s32.h             |  15 +-
 drivers/pinctrl/nxp/pinctrl-s32cc.c           | 646 ++++++++++++++----
 drivers/pinctrl/nxp/pinctrl-s32g2.c           |  25 +-
 6 files changed, 707 insertions(+), 138 deletions(-)

-- 
2.34.1