[PATCH v2 1/6] KVM: arm64: Make EL2 exception entry and exit context-synchronization events

Ben Horgan ben.horgan at arm.com
Fri May 1 08:07:59 PDT 2026


Hi Fuad,

On 5/1/26 16:01, Fuad Tabba wrote:
> Hi Ben,
> 
> On Fri, 1 May 2026 at 14:47, Ben Horgan <ben.horgan at arm.com> wrote:
>>
>> Hi Fuad,
>>
>> On 5/1/26 12:21, Fuad Tabba wrote:
>>> SCTLR_EL2.EIS and SCTLR_EL2.EOS control whether exception entry and
>>> exit at EL2 are Context Synchronisation Events (CSEs). Per ARM DDI
>>> 0487 M.b D24.2.175 (p. D24-9754):
>>>
>>>   - !FEAT_ExS: the bit is RES1, so the entry/exit is unconditionally
>>>     a CSE.
>>>   - FEAT_ExS: the reset value is architecturally UNKNOWN; software
>>>     must set the bit to make the entry/exit a CSE.
>>>
>>> INIT_SCTLR_EL2_MMU_ON in arch/arm64/include/asm/sysreg.h sets neither
>>> bit. KVM/arm64 hot paths rely on ERET from EL2 being a CSE, and on
>>> synchronous EL1->EL2 entry being a CSE, to elide explicit ISBs after
>>> MSRs to context-switching system registers (HCR_EL2, ZCR_EL2,
>>> ptrauth keys, etc.). On FEAT_ExS hardware those reliances are not
>>> architecturally backed unless EOS=1 (and, for entry, EIS=1).
>>>
>>> Until commit 0a35bd285f43 ("arm64: Convert SCTLR_EL2 to sysreg
>>> infrastructure"), SCTLR_EL2_RES1 was a hand-rolled mask that
>>> included BIT(11) (EOS) and BIT(22) (EIS), so INIT_SCTLR_EL2_MMU_ON
>>> was setting both unconditionally. The conversion made
>>> SCTLR_EL2_RES1 auto-generated; because the sysreg tooling only
>>> models unconditionally-RES1 fields and EIS/EOS are RES1 only when
>>> FEAT_ExS is absent, the auto-generated mask is UL(0). The seven
>>> other bits dropped from the old mask (positions 4, 5, 16, 18, 23,
>>> 28, 29) are unconditionally RES1 in the E2H=0 SCTLR_EL2 layout per
>>> DDI 0487 M.b D24.2.175, so dropping them is harmless. EIS and EOS
>>> are the only bits whose semantics changed for FEAT_ExS hardware
>>> and where the kernel relies on the value being 1.
>>>
>>> Make the guarantee explicit: include SCTLR_ELx_EIS | SCTLR_ELx_EOS in
>>> INIT_SCTLR_EL2_MMU_ON so that EL2 exception entry and exit are
>>> unconditionally CSEs regardless of whether FEAT_ExS is implemented.
>>> This matches the pairing in arch/arm64/kvm/config.c which treats EIS
>>> and EOS together as RES1 under !FEAT_ExS.
>>
>> In v1 you also had this sentence:
>>
>> "INIT_SCTLR_EL2_MMU_OFF is left unchanged: that path is used during
>> very early EL2 init and the EL2 MMU-off transition, neither of which
>> relies on these bits in the same way."
>>
>> To me, it seems useful to keep that sentence as it makes it clear that INIT_SCTLR_EL2_MMU_OFF is purposely not changed.
>> Or is there a reason why you dropped it? Perhaps it's just obvious to people more familiar with this code.
> 
> To be honest, I thought the commit message was quite long, and I
> wanted to make it a bit more concise. I could re-introduce it if you
> think it's helpful.

I don't really mind but it was useful in helping me understand your change.

Thanks,

Ben



More information about the linux-arm-kernel mailing list