[PATCH v20 06/10] power: reset: Add psci-reboot-mode driver

[Shivendra Pratap]

On 27-03-2026 19:44, Lorenzo Pieralisi wrote:
> On Wed, Mar 04, 2026 at 11:33:06PM +0530, Shivendra Pratap wrote:
>> PSCI supports different types of resets like COLD reset, ARCH WARM
>> reset, vendor-specific resets. Currently there is no common driver that
>> handles all supported psci resets at one place. Additionally, there is
>> no common mechanism to issue the supported psci resets from userspace.
>>
>> Add a PSCI reboot mode driver and define two types of PSCI resets in the
>> driver as reboot-modes: predefined resets controlled by Linux
>> reboot_mode and customizable resets defined by SoC vendors in their
>> device tree under the psci:reboot-mode node.
>>
>> Register the driver with the reboot-mode framework to interface these
>> resets to userspace. When userspace initiates a supported command, pass
>> the reset arguments to the PSCI driver to enable command-based reset.
>>
>> This change allows userspace to issue supported PSCI reset commands
>> using the standard reboot system calls while enabling SoC vendors to
>> define their specific resets for PSCI.
>>
>> Signed-off-by: Shivendra Pratap <shivendra.pratap at oss.qualcomm.com>
>> ---
>>   drivers/power/reset/Kconfig            |  10 +++
>>   drivers/power/reset/Makefile           |   1 +
>>   drivers/power/reset/psci-reboot-mode.c | 119 +++++++++++++++++++++++++++++++++
> 
> Add an entry into MAINTAINERS.POWER STATE COORDINATION INTERFACE for this
> specific file because I'd like to keep an eye on it, if you don't mind.
> 
> Creating a MAINTAINER entry just for this seems overkill to me, it
> does not look like it is done for other reboot mode drivers.

Ack.

thanks,
Shivendra