[PATCH v2 1/4] dt-bindings: usb: dwc3-xilinx: Add MMI USB support on Versal Gen2 platform

[Radhey Shyam Pandey]

Versal Gen2 platform multimedia integrated (MMI) module has a USB3.2 Gen
2x1 Dual Role Device IP. Introduce a new compatibility string to support
it. The USB wrapper registers reside in the MMI UDH system-level control
registers (SLCR) block, so instead of a dedicated reg property, add
xlnx,usb-syscon phandle with four cells specifying register offsets for
USB2 PHY, USB3 PHY, USB DRD, and USB power configuration within the SLCR.

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
---
Changes for v2:
- Add blank line after compatible as suggested by Krzysztof.
- Retain the mmi suffix in the compatible string, as this USB 3.2 Gen2
  IP from Synopsys is part of the dedicated Multimedia Interface. The
  Versal Gen2 platform also includes a separate USB 2.0 controller,
  and the mmi suffix uniquely distinguishes between the two USB
  controllers. MMI is an independent subsystem particularly targeted for
  deployment in Multi-Media related applications. The MMI block include
  following submodules: UDH: USB3.2 Gen 2x1 Dual Role Device, DisplayPort
  Transmit Controller, Security Module (ESM) for DisplayPort and HDMI
  Controllers, DP AUX-I2C PHY.
- For MMI USB define parent address space i.e UDH block.
- Fix inconsistent MHz spacing to use SI convention with spaces.
- Move description before $ref and items in xlnx,usb-syscon property.
- Restore original zynqmp-dwc3 example, add new versal2-mmi-dwc3 example.
- Use 'usb' node name (without unit address) for versal2 example since
  it has no reg property.
- Use 1/1 address/size configuration in versal2 example, use lowercase
  hex in syscon offsets.
---
 .../devicetree/bindings/usb/dwc3-xilinx.yaml  | 70 ++++++++++++++++++-
 1 file changed, 67 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
index d6823ef5f9a7..5e31b961aff7 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -15,6 +15,8 @@ properties:
       - enum:
           - xlnx,zynqmp-dwc3
           - xlnx,versal-dwc3
+          - xlnx,versal2-mmi-dwc3
+
   reg:
     maxItems: 1
 
@@ -37,8 +39,9 @@ properties:
       A list of phandle and clock-specifier pairs for the clocks
       listed in clock-names.
     items:
-      - description: Master/Core clock, has to be >= 125 MHz
-          for SS operation and >= 60MHz for HS operation.
+      - description: Master/Core clock, has to be >= 156.25 MHz in SSP
+          mode, >= 125 MHz for SS operation and >= 60 MHz for HS
+          operation.
       - description: Clock source to core during PHY power down.
 
   clock-names:
@@ -79,6 +82,20 @@ properties:
     description: GPIO used for the reset ulpi-phy
     maxItems: 1
 
+  xlnx,usb-syscon:
+    description:
+      Phandle to the MMI UDH system-level control register (SLCR) syscon
+      node, with four cells specifying the register offsets for USB2 PHY,
+      USB3 PHY, USB DRD, and USB power configuration respectively.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to MMI UDH SLCR syscon node
+          - description: USB2 PHY register offset within SLCR
+          - description: USB3 PHY register offset within SLCR
+          - description: USB DRD register offset within SLCR
+          - description: USB power register offset within SLCR
+
 # Required child node:
 
 patternProperties:
@@ -87,7 +104,6 @@ patternProperties:
 
 required:
   - compatible
-  - reg
   - "#address-cells"
   - "#size-cells"
   - ranges
@@ -104,6 +120,7 @@ allOf:
           contains:
             enum:
               - xlnx,versal-dwc3
+              - xlnx,versal2-mmi-dwc3
     then:
       properties:
         resets:
@@ -117,6 +134,26 @@ allOf:
         reset-names:
           minItems: 3
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-dwc3
+              - xlnx,versal-dwc3
+    then:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: xlnx,versal2-mmi-dwc3
+    then:
+      required:
+        - xlnx,usb-syscon
+
 additionalProperties: false
 
 examples:
@@ -156,3 +193,30 @@ examples:
             };
         };
     };
+  - |
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+    usb {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "xlnx,versal2-mmi-dwc3";
+        clocks = <&zynqmp_clk 32>, <&zynqmp_clk 34>;
+        clock-names = "bus_clk", "ref_clk";
+        power-domains = <&zynqmp_firmware PD_USB_0>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>;
+        reset-names = "usb_crst";
+        phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+        phy-names = "usb3-phy";
+        xlnx,usb-syscon = <&udh_slcr 0x005c 0x0070 0x00c4 0x00f8>;
+        ranges;
+
+        usb at fe200000 {
+            compatible = "snps,dwc3";
+            reg = <0xfe200000 0x40000>;
+            interrupt-names = "host", "otg";
+            interrupts = <0 65 4>, <0 69 4>;
+            dr_mode = "host";
+            dma-coherent;
+        };
+    };
-- 
2.43.0