[PATCH] mailbox: Fix NULL message support in mbox_send_message()
Jassi Brar
jassisinghbrar at gmail.com
Sun Mar 29 09:33:27 PDT 2026
On Fri, Mar 27, 2026 at 5:00 PM <jassisinghbrar at gmail.com> wrote:
>
> From: Jassi Brar <jassisinghbrar at gmail.com>
>
> The active_req field serves double duty as both the "is a TX in
> flight" flag (NULL means idle) and the storage for the in-flight
> message pointer. When a client sends NULL via mbox_send_message(),
> active_req is set to NULL, which the framework misinterprets as
> "no active request". This breaks the TX state machine by:
>
> - tx_tick() short-circuits on (!mssg), skipping the tx_done
> callback and the tx_complete completion
> - txdone_hrtimer() skips the channel entirely since active_req
> is NULL, so poll-based TX-done detection never fires.
>
> Fix this by introducing a MBOX_NO_MSG sentinel value that means
> "no active request," freeing NULL to be valid message data. The
> sentinel is defined in the subsystem-internal mailbox.h so that
> controller drivers within drivers/mailbox/ can reference it, but
> it is not exposed to clients outside the subsystem.
>
> Fifteen in-tree callers send NULL (doorbell-style IPCs on Qualcomm,
> Tegra, TI, Xilinx, i.MX, SCMI, and PCC platforms). All were
> audited for regression:
>
> - Most already work around the bug via knows_txdone=true with a
> manual mbox_client_txdone() call, making the framework's
> tracking irrelevant. These are unaffected.
>
> - Poll-based callers (Xilinx zynqmp/r5) are strictly better off:
> the poll timer now correctly detects NULL-active channels
> instead of silently skipping them.
>
> - irq-qcom-mpm.c was a pre-existing bug -- the only Qualcomm
> caller that omitted the knows_txdone + mbox_client_txdone()
> pattern. Fixed in a companion commit ("irqchip/qcom-mpm: Fix
> missing mailbox TX done acknowledgment").
>
> - No caller sets both a tx_done callback and sends NULL, nor
> combines tx_block=true with NULL sends, so the newly reachable
> callback/completion paths are never exercised.
>
> Also update tegra-hsp's flush callback, which directly inspects
> active_req to wait for the channel to drain: the old "!= NULL"
> check becomes "!= MBOX_NO_MSG", otherwise flush spins until
> timeout since the sentinel is non-NULL.
>
> The only tradeoff is that 'MBOX_NO_MSG' can not be used as a message
> by clients.
>
> Reported-by: Joonwon Kang <joonwonkang at google.com>
> Reviewed-by: Douglas Anderson <dianders at chromium.org>
> Signed-off-by: Jassi Brar <jassisinghbrar at gmail.com>
> ---
> drivers/mailbox/mailbox.c | 15 ++++++++-------
> drivers/mailbox/mailbox.h | 3 +++
> drivers/mailbox/tegra-hsp.c | 2 +-
> 3 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c
> index 617ba505691d..9622369cab66 100644
> --- a/drivers/mailbox/mailbox.c
> +++ b/drivers/mailbox/mailbox.c
> @@ -52,7 +52,7 @@ static void msg_submit(struct mbox_chan *chan)
> int err = -EBUSY;
>
> scoped_guard(spinlock_irqsave, &chan->lock) {
> - if (!chan->msg_count || chan->active_req)
> + if (!chan->msg_count || chan->active_req != MBOX_NO_MSG)
> break;
>
> count = chan->msg_count;
> @@ -87,13 +87,13 @@ static void tx_tick(struct mbox_chan *chan, int r)
>
> scoped_guard(spinlock_irqsave, &chan->lock) {
> mssg = chan->active_req;
> - chan->active_req = NULL;
> + chan->active_req = MBOX_NO_MSG;
> }
>
> /* Submit next message */
> msg_submit(chan);
>
> - if (!mssg)
> + if (mssg == MBOX_NO_MSG)
> return;
>
> /* Notify the client */
> @@ -114,7 +114,7 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
> for (i = 0; i < mbox->num_chans; i++) {
> struct mbox_chan *chan = &mbox->chans[i];
>
> - if (chan->active_req && chan->cl) {
> + if (chan->active_req != MBOX_NO_MSG && chan->cl) {
> txdone = chan->mbox->ops->last_tx_done(chan);
> if (txdone)
> tx_tick(chan, 0);
> @@ -246,7 +246,7 @@ int mbox_send_message(struct mbox_chan *chan, void *mssg)
> {
> int t;
>
> - if (!chan || !chan->cl)
> + if (!chan || !chan->cl || mssg == MBOX_NO_MSG)
> return -EINVAL;
>
> t = add_to_rbuf(chan, mssg);
> @@ -319,7 +319,7 @@ static int __mbox_bind_client(struct mbox_chan *chan, struct mbox_client *cl)
> scoped_guard(spinlock_irqsave, &chan->lock) {
> chan->msg_free = 0;
> chan->msg_count = 0;
> - chan->active_req = NULL;
> + chan->active_req = MBOX_NO_MSG;
> chan->cl = cl;
> init_completion(&chan->tx_complete);
>
> @@ -477,7 +477,7 @@ void mbox_free_channel(struct mbox_chan *chan)
> /* The queued TX requests are simply aborted, no callbacks are made */
> scoped_guard(spinlock_irqsave, &chan->lock) {
> chan->cl = NULL;
> - chan->active_req = NULL;
> + chan->active_req = MBOX_NO_MSG;
> if (chan->txdone_method == TXDONE_BY_ACK)
> chan->txdone_method = TXDONE_BY_POLL;
> }
> @@ -532,6 +532,7 @@ int mbox_controller_register(struct mbox_controller *mbox)
>
> chan->cl = NULL;
> chan->mbox = mbox;
> + chan->active_req = MBOX_NO_MSG;
> chan->txdone_method = txdone;
> spin_lock_init(&chan->lock);
> }
> diff --git a/drivers/mailbox/mailbox.h b/drivers/mailbox/mailbox.h
> index e1ec4efab693..c77dd6fc5b8a 100644
> --- a/drivers/mailbox/mailbox.h
> +++ b/drivers/mailbox/mailbox.h
> @@ -5,6 +5,9 @@
>
> #include <linux/bits.h>
>
> +/* Sentinel value distinguishing "no active request" from "NULL message data" */
> +#define MBOX_NO_MSG ((void *)-1)
> +
> #define TXDONE_BY_IRQ BIT(0) /* controller has remote RTR irq */
> #define TXDONE_BY_POLL BIT(1) /* controller can read status of last TX */
> #define TXDONE_BY_ACK BIT(2) /* S/W ACK received by Client ticks the TX */
> diff --git a/drivers/mailbox/tegra-hsp.c b/drivers/mailbox/tegra-hsp.c
> index ed9a0bb2bcd8..7991e8dba579 100644
> --- a/drivers/mailbox/tegra-hsp.c
> +++ b/drivers/mailbox/tegra-hsp.c
> @@ -497,7 +497,7 @@ static int tegra_hsp_mailbox_flush(struct mbox_chan *chan,
> mbox_chan_txdone(chan, 0);
>
> /* Wait until channel is empty */
> - if (chan->active_req != NULL)
> + if (chan->active_req != MBOX_NO_MSG)
> continue;
>
> return 0;
> --
> 2.52.0
>
Applied to mailbox/for-next
More information about the linux-arm-kernel
mailing list