[PATCH] ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX

[Aaro Koskinen]

On OMAP16XX, the UART enable bit shifts are written instead of the actual
bits. This breaks the boot when DEBUG_LL and earlyprintk is enabled;
the UART gets disabled and some random bits get enabled. Fix that.

Fixes: 34c86239b184 ("ARM: OMAP1: clock: Fix early UART rate issues")
Signed-off-by: Aaro Koskinen <aaro.koskinen at iki.fi>
---
 arch/arm/mach-omap1/clock_data.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index c58d200e4816..5203b047deac 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -700,8 +700,8 @@ int __init omap1_clk_init(void)
 	/* Make sure UART clocks are enabled early */
 	if (cpu_is_omap16xx())
 		omap_writel(omap_readl(MOD_CONF_CTRL_0) |
-			    CONF_MOD_UART1_CLK_MODE_R |
-			    CONF_MOD_UART3_CLK_MODE_R, MOD_CONF_CTRL_0);
+			    (1 << CONF_MOD_UART1_CLK_MODE_R) |
+			    (1 << CONF_MOD_UART3_CLK_MODE_R), MOD_CONF_CTRL_0);
 #endif
 
 	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-- 
2.39.2