[PATCH v5 3/9] arm64: dts: amlogic: t7: Add MMC controller nodes

[Neil Armstrong]

On 3/26/26 10:59, Ronald Claveau wrote:
> Add device tree nodes for the three MMC controllers available
> on the Amlogic T7 SoC, using amlogic,meson-axg-mmc as fallback compatible.
> All nodes are disabled by default and should be
> enabled in the board-specific DTS file.
> 
> Signed-off-by: Ronald Claveau <linux-kernel-dev at aliel.fr>
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 39 +++++++++++++++++++++++++++++
>   1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> index 36d13371f56ba..fe1ced0a58967 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> @@ -374,6 +374,45 @@ sec_ao: ao-secure at 10220 {
>   				reg = <0x0 0x10220 0x0 0x140>;
>   				amlogic,has-chip-id;
>   			};
> +
> +			sd_emmc_a: mmc at 88000 {
> +				compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc";
> +				reg = <0x0 0x88000 0x0 0x800>;
> +				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>,
> +					 <&clkc_periphs CLKID_SD_EMMC_A>,
> +					 <&scmi_clk CLKID_FCLK_DIV2>;
> +				clock-names = "core", "clkin0", "clkin1";
> +				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_A_SEL>;
> +				assigned-clock-parents = <&xtal>;
> +				status = "disabled";
> +			};
> +
> +			sd_emmc_b: mmc at 8a000 {
> +				compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc";
> +				reg = <0x0 0x8a000 0x0 0x800>;
> +				interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>,
> +					 <&clkc_periphs CLKID_SD_EMMC_B>,
> +					 <&scmi_clk CLKID_FCLK_DIV2>;
> +				clock-names = "core", "clkin0", "clkin1";
> +				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_B_SEL>;
> +				assigned-clock-parents = <&xtal>;
> +				status = "disabled";
> +			};
> +
> +			sd_emmc_c: mmc at 8c000 {
> +				compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc";
> +				reg = <0x0 0x8c000 0x0 0x800>;
> +				interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>,
> +					 <&clkc_periphs CLKID_SD_EMMC_C>,
> +					 <&scmi_clk CLKID_FCLK_DIV2>;
> +				clock-names = "core", "clkin0", "clkin1";
> +				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_C_SEL>;
> +				assigned-clock-parents = <&xtal>;
> +				status = "disabled";
> +			};
>   		};
>   
>   	};
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil