[PATCH v13 00/48] arm64: Support for Arm CCA in KVM

[Gavin Shan]

Hi Steven,

On 3/19/26 1:53 AM, Steven Price wrote:
> 
> This series is based on v7.0-rc1. It is also available as a git
> repository:
> 
> https://gitlab.arm.com/linux-arm/linux-cca cca-host/v13
> 
> Work in progress changes for kvmtool are available from the git
> repository below:
> 
> https://gitlab.arm.com/linux-arm/kvmtool-cca cca/v11
> 

Could you please share if we have a working qemu repository on top of this
(v13) series? The previous qemu repository [1] seems out of dated for long
time. I heard Jean won't be able to continue his efforts on QEMU part, who
is going to pick it up in this case.

[1] https://git.codelinaro.org/linaro/dcap/qemu.git    (branch: cca/latest)

> Note that the kvmtool code has been tidied up (thanks to Suzuki) and
> this involves a minor change in flags. The "--restricted_mem" flag is no
> longer recognised (or necessary).
> 
> The TF-RMM has not yet merged the RMMv2.0 support, so you will need to
> use the following branch:
> 
> https://git.trustedfirmware.org/TF-RMM/tf-rmm.git topics/rmm-v2.0-poc
> 

I'm seeing error to initialize RMM with the suggested RMM branch (topics/rmm-v2.0-poc)
and the upstream TF-A [1]. It seems the problem is compatible issue in the
RMM-EL3 interface. RMM requires verion 2.0 while TF-A only supports 0.8. So
I guess I must be using a wrong TF-A repository. Could you please share which
TF-A repository you use for testing?

[1] git at github.com:ARM-software/arm-trusted-firmware.git    (branch: master)

Booting logs
=============
NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v2.14.0(debug):67edb4f8e
NOTICE:  BL1: Built : 00:01:39, Mar 25 2026
INFO:    BL1: RAM 0xe0ee000 - 0xe0f7000
INFO:    BL1: Loading BL2
INFO:    Loading image id=1 at address 0xe05b000
INFO:    Image id=1 loaded: 0xe05b000 - 0xe0642bc
NOTICE:  BL1: Booting BL2
INFO:    Entry point address = 0xe05b000
INFO:    SPSR = 0x3cd
NOTICE:  BL2: v2.14.0(debug):67edb4f8e
NOTICE:  BL2: Built : 00:01:39, Mar 25 2026
INFO:    BL2: Doing platform setup
INFO:    Reserved RMM memory [0x40100000, 0x418fffff] in Device tree
INFO:    BL2: Loading image id 3
INFO:    Loading image id=3 at address 0xe090000
INFO:    Image id=3 loaded: 0xe090000 - 0xe0a292b
INFO:    BL2: Loading image id 35
INFO:    Loading image id=35 at address 0x40100000
INFO:    Image id=35 loaded: 0x40100000 - 0x401a11e0
INFO:    BL2: Loading image id 5
INFO:    Loading image id=5 at address 0x60000000
INFO:    Image id=5 loaded: 0x60000000 - 0x60200000
NOTICE:  BL2: Booting BL31
INFO:    Entry point address = 0xe090000
INFO:    SPSR = 0x3cd
INFO:    GPT: Boot Configuration
INFO:      PPS/T:     0x2/40
INFO:      PGS/P:     0x0/12
INFO:      L0GPTSZ/S: 0x0/30
INFO:      PAS count: 6
INFO:      L0 base:   0xedfe000
INFO:    Enabling Granule Protection Checks
NOTICE:  BL31: v2.14.0(debug):67edb4f8e
NOTICE:  BL31: Built : 00:01:39, Mar 25 2026
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 287
INFO:    BL31: Initializing runtime services
INFO:    RMM setup done.
INFO:    BL31: Initializing RMM
INFO:    RMM init start.
ERROR:   RMM init failed: -2                           <<<< Error raised by RMM here
WARNING: BL31: RMM initialization failed
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x60000000
INFO:    SPSR = 0x3c9
UEFI firmware (version  built at 19:33:51 on Mar  3 2026)


Thanks,
Gavin